The most common cause of chainsaw chain damage and breakage is probably a lack of knowledge of properly using and maintaining a chainsaw. When you need to replace a part on your chainsaw, whether a chain or another part, never try to be frugal and save money by getting cheap or low-quality parts; one of the main causes of chain breaks in a chainsaw is a low-quality chain. You need to check the tension on the chainsaw chain before every use to ensure that you won’t use the chainsaw and the chain unexpectedly snaps.
Another cause of chainsaw chain breaking is simply using the chainsaw while the tension of the chain is not adjusted properly. To prevent a chainsaw chain from breaking, don’t touch the running chainsaw blade on metal or stone. If your chainsaw chain broke, then to use it in the future it’s important to install a new and functioning chain.
Chainsaw chains can break and snap due to improper use and maintenance, using a poor-quality chain, and incorrectly assembled chain parts. Chainsaw chains can come apart, break, or snap, especially if you aren’t well-informed about correct chainsaw use and maintenance. Improper use, lack of maintenance, low-quality parts and improper chain tension are the main reasons chainsaw chains deteriorate and eventually break entirely.
The tension in the chain together with the piece you are working on could fling a broken chain any which way. No experiment can prove that you are safe from a broken chain. Just wear PPE. Your basic reasoning about what should happen is sound, but neglects the tension in the chain and possible interactions with the wood being worked on – say the chain hits a nail in a flexible tree branch.
I have had only two break on me, and both of them were on my 372.Both broke while in the cut, one when the tip grabbed a branch that I didnt see on the other side, the other broke for no reason at all. Both chains were shot anyway, both were filed down to the witness mark and ready to be retired anyway. Never have been hit by a broken chain, but there is always tomorrow…..
what happens if chainsaw chain breaks Related Question:
What happens when chain breaks on chainsaw?
Ed to answer your question same scenario, chain breaks the drive sprocket instantly disengages from the drive links. Chain stops. No whipping or flailing. Kick backs by far are the greatest danger of chainsaw operation next to struck byes from trees or parts of a tree.
Why would a chainsaw chain break?
Chain Tension If the chain is too tight or too lose it can cause a chain break. So how you can properly tension a chain? Make sure to turn off the chainsaw and let the chain to cool down. Because heat causes the bar and chain to expand.
Can a chainsaw without a chain hurt you?
Can You Run a Chainsaw without the Chain? You can run a chainsaw without a chain but try to do that just for a few minutes. I wouldn’t advise you to run a chainsaw without a chain for more than a few minutes. If you are not careful, you can overheat the engine and increase the wear and tear.
Can chainsaw chains snap?
It’s there to keep the chain from wrapping around your wrist if it should break or come loose. It’s called a chain catcher, and it’s removeable. So, don’t remove it. More then likely it just gets stuck in the cut/wood..or falls off on the ground…not very likely it will become a ‘missile’..
Can a broken chainsaw chain be fixed?
If you have decided to repair the chain, at this point you can do so. You can sharpen the chain with a chain sharpener, remove additional chains using the rivet punch or screwdriver if the chain has stretched, adjust the links in the chain, or replace damaged links in the chainsaw chain.
Do you start a chainsaw with the brake on?
When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
What is a chain break?
Definition of chain break : a brief radio or television commercial given during one of the station-identification intervals in a network program.
How does a chainsaw chain catcher work?
The chain catcher helps prevent the chain being thrown back towards the user, if the chain breaks or becomes derailed. The catcher catches the chain when it derails downwards and shortens it.
How do you stretch a new chainsaw chain?
Every chainsaw has a tension screw that’s located at or close to the base of the chainsaw bar. If you want to tighten the chain, turn the tension screw clockwise. If you want to loosen up the chain, turn the tension chain counterclockwise.
Can a chainsaw cut through bone?
Bones may be slightly tougher, but they are rigid and a chainsaw will likely be able to cut through them without much problem – though it will probably dull the blade more than wood.
Can you cut metal with a chainsaw?
Yes, chainsaws can cut through metal. Of course, this depends on the type of metal and thickness. You also need a powerful chainsaw with a chain that has metallic reinforcement or a carbide-tipped chain. In general, it is not advised to use a chainsaw to cut metal, use a specialized metal saw instead.
Can you cut with the tip of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.
How do I know if my chainsaw chain is worn out?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Can you rev chainsaw with brake on?
Running a chainsaw with the brake on can be dangerous for you and anyone in your vicinity. The chainsaw will not cut, but it still creates sparks that can cause fires or startle nearby pets. It also doesn’t allow the saw to cool down enough which increases the likelihood of overheating and breaking down.