Step 5: If you are using your saw for felling or crosscutting, boring the chainsaw bar into the trunk may be the best way to cut. Step 7: Pay attention to the nose of your chainsaw bar and how it is positioned. Step 9: Use narrow-nose bars, such as Oregon Double Guard bars, to ensure maximum kickback safety.
‘Chainsaw kickback’ is a phrase that is used when discussing operating chainsaws. To ensure absolute safety, it is extremely important to ensure you’re well versed in what it means and how to handle it. To fully prepare for chainsaw kickback you first need to understand what it is, how it happens and how to avoid it.
The reason it has this name is that the chainsaw tip is the most common part of the chainsaw that can cause a kickback. If you’re cutting with a chainsaw and the wood closes around the chain tightly, it can cause a chainsaw kickback to occur. Chainsaw kickback is the most common type of chainsaw injury that people encouter.
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback – the rapid upward motion ofh te guide bar that can occur when the saw chain, near the nose of the top area of the guide bar, contacts an object such as a log or branch, or the backwardm otion that can occur when the wood closes in and pinches hte saw chain in the cut. The most common and probably most violent kickback occurs when contact is made, either accidentally or intentionally, in this “Kickback zone.” In some cases the blade tip may move upward and back toward the operator who could suffer a very serious or fatal injury.
Below, we’ll explain chainsaw kickback as well as the kickback zone, causes of kickback, preventive measures, and how to avoid kickbacks in the first place altogether. Chainsaw chaps are preferable because they are chainsaw resistant and are also specially designed to protect the left side of your leg, which is another prime target for a kickback. There are many ways to avoid a potential chainsaw kickback.
what makes a chainsaw kickback Related Question:
How often does chainsaw kickback happen?
Kickback can happen in the blink of an eye too. In fact, about 30,000 chainsaw-related injuries happen each year, with chainsaw kickback accidents being the most common hazard.
Why is my chainsaw bouncing?
Chainsaw chain jumps and is broken The chain saw belt jumps when it breaks at full speed. This situation can be caused by using an unsuitable chain. This happens when you are cutting very hard wood with a gouge chain. It is indeed very important to choose the right belt for the job to be done.
How does chainsaw kickback brake work?
In the event of sudden or rapid movement of the chainsaw, such as when kickback occurs, the brake is designed to engage automatically through the force of inertia. Since kickback occurs suddenly and with great force most people cannot react fast enough to activate the chain brake manually.
What causes a kickback?
Kickback is a situation when wood gets picked up by the blade and violently thrown at you, which happens way faster than you can react. This usually occurs when the workpiece pinches the blade or gets stuck between the blade and the rip fence.
Why is my chainsaw hard to pull and kicks back?
If your chainsaw is hard to pull, here are some common causes: The pully system is snagged or stuck. The starter assembly is stuck or sticky. The housing may be damaged.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Why do chainsaws buck?
If a log is not sitting firmly on the ground when you cut, the downward force can cause the log to close up on your chain. Pinching of the blade is more likely to occur when you’re cutting from the top down.
What are metal bucking spikes on a chainsaw?
Bumper Spikes: This series of sharp metal spikes protruding from the saw near the base of the bar provide leverage for easier, more controlled sawing. Jab the spikes into the log, then pivot the bar downward to guide the chain through the cut.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Why does my chainsaw chain keep spinning?
Carburetor Idle Adjustment The most probable – and easiest to fix – cause of chain rotation while the chainsaw engine idles is a poorly adjusted idle setting on the carburetor. The result is that too much fuel is delivered to the combustion chamber when the throttle is released, and the engine doesn’t really slow.
What is throttle interlock?
The throttle interlock trigger prevents the throttle from engaging accidentally. If the interlock is not depressed, the throttle cannot engage. The feller must have his left hand firmly on the handle to depress the interlock and trigger at the same time.
What should you not do with a chainsaw?
Don’t Cut on the Ground When Using a Chainsaw Cutting on or near the ground puts you at risk for sinking the bar into the dirt. When learning how to use a chainsaw safely, one of the first things you should do is make sure to make your cuts off the ground.
What’s the safest chainsaw?
Chainsaws are useful when doing work on your home, but they can feel dangerous to use. It’s not too bad if you know what you’re doing, but it’s so easy to make one wrong move—and then it’s game over.
Do you need anti-kickback pawls?
It should go without saying that no one safety device can make a saw 100% safe. While anti-kickback pawls will reduce your risk of injury or equipment damage do not neglect to act carefully and to use other safety equipment.
What is the kickback zone?
The term “kickback danger zone” refers to the top of the tip of the chainsaw bar. This area has a high kickback risk. You should never saw using this part of the chain saw bar, since doing so will significantly increase the chances that you will experience kickback.