I have Sugihara 24″ & 32″ bars as well as “TOTAL” super pro bars in 20, 24 & 28 inch. The Stihl ES Light bars and Husky Techlite bars are the best on the market, lighter and stronger. Oregon Reduced weight bars are light, but not ridged enough IMHO, but overall pretty nice, and they share the same sprocket tip as normal Power Match plus bars.
“Until just a few years ago, when a pro user purchased a new powerhead, he bolted on the same bar and chain he used on his last saw. These cutting attachments were not light. Most were a three foot section of solid steel. It was a strange marriage. With the powerhead, every ounce seemed to count, but little thought was given to bolting on a heavy guide bar. The reason for this was there was no alternative. Today, there is. Oregon Cutting Systems, Stihl, and Husqvarna all offer reduced-weight guide bars that are significantly lighter than a conventional guide bar. For example, an Oregon brand 32” reduced-weight bar weighs almost a third less than a conventional bar. The loss of rigidity combined with the fact that the body of the guide bar is no longer monolithic makes this bar a bad choice for saw operators who pry or “Work” their bar. Currently the Husqvarna bar is not available in lengths over 28″, so this bar will not appeal to NW pro saw users who typically run 32″ bars.
what is the lightest chainsaw bar Related Question:
How much does a chainsaw bar weight?
A brand new, never been used, 20″ Stihl ES Light bar weighs 2 pounds 1 ounce on Grandma’s kitchen scale.
How much lighter is the Stihl light bar?
Stihl Rollomatic E Super Light chainsaws bars are 30% lighter than their solid steel counterparts. Bars are made machined from a single piece of rigid steel, then hollowed out on one side and filled back with a lightweight material. The reduced weight improves the chain saw balance.
What is the lightest professional chainsaw?
The X Series ECHO chainsaw CS-2511T 12 in. is the lightest gas powered chainsaw in North America. The 25.0 cc professional-grade engine delivers incredible horse power from a compact, easily maneuverable body.
How heavy is the average chainsaw?
How Much Does A Chainsaw Weigh? On Average, a chainsaw weighs between 10 to 15 pounds. However, some small electric chainsaws can weigh as low as 6 pounds while some of the larger gas chainsaws can go up to 20 pounds. Electric chainsaws are smaller and compact in build, so they usually weigh less than the others.
What size bars does Stihl make?
STIHL guide bars range from 10″ (found on our tree-trimming pole pruners) to an incredible 59″ (used in extreme felling operations).
How do you measure a chainsaw bar?
To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
What does powerhead weight mean?
NOTE: Powerhead weight refers to dry weight. NOTE: The actual listed guide bar length can vary from the effective cutting length based on which power head it is installed.
How much do battery operated chainsaws weigh?
As to weight, cordless electric chainsaws are equal to or a couple of pounds heavier than their gas-engine equivalents. A fueled 50-cc gas-engine saw, with an 18-inch bar, weighs 11 to 12 pounds. The cordless chainsaws we tested weigh anywhere from 11 pounds to about 14 pounds.
What is the lightest most powerful chainsaw?
Weighing only 5.7 pounds (without bar and chain), ECHO’s CS-2511P is the lightest gas-powered rear-handle chainsaw in the world with the most power in its class, states the company.
What is the lightest Husqvarna chainsaw?
Husqvarna 440e II 16″ If you liked the sounds of our best value pick but need a little more power, look no further than the 440e II. At just 9.78 pounds, it’s one of the most lightweight and easy to handle saws we’ve ever tested – especially given its impressive torque.
What is the lightest chainsaw STIHL makes?
The STIHL MS 170 is the perfect lightweight chainsaw for homeowners seeking a great value. Compact, lightweight with just the right amount of power, the MS 170 makes quick work of trimming or cutting small trees, fallen limbs after a storm, and other tasks around the yard.
How much does a Stihl 362 cost?
Starting a $809.99 with a 18″ bar and chain. Brains and brawn come together in this well-rounded professional chainsaw. The MS 362 C-M features the same great power, weight and fuel efficiency as the MS 362, but also features our exclusive STIHL M-Tronic™ engine management technology.
Will a Oregon bar fit a Stihl?
The AdvanceCut guide bar features a small radius multi-rivet nose for good durability and control. Contact Oregon Customer Support to ensure the best fit for your chainsaw. Fits Stihl 024, 026, 026P, 030, 031, 029, 036, MS 280, MS 271, MS 270, 028, 032, MS 290, 034, MS 260.
How big of a bar can you put on a ms271?
Heavy-Duty Chain Saws All of these models — which include the MS 271, MS 291, MS 311 and MS 391 — can take guide bars between 16 and 20 inches.
What size bar can you put on a ms250?
A combination of features and a high power-to-weight ratio makes this one of the best homeowner chainsaws on the market. Available with 14″/35cm, 16″/40cm or 18″/45cm guide bars.