The main reason for LP chain is that it has less mass, or bulk or weight, whatever, so the engine can pull it around the bar easier, so it makes more horsepower available to cut. The small saws perform better with 3/8 LP chain, where a standard 3/8 chain would cut slower and possibly stall. My old Stihl 020 had 1/4 chain on it, and with so many rivets it stretched like crazy, so they came out with low profile 3/8, same pitch so it doesn’t stretch as bad, but a lower height with less mass so the saw could pull it.
Low profile chain is supposed to be safer because it doesn’t kick back as easily as regular chain, and being a little smaller, does not require so much torque. So my nice dealer said he would make up some more aggressive 3/8 pitch chain for me. The issue is that the chain pins or rivets are slightly smaller with the lp chain and the sprocket teeth are therefore made slightly bigger to take up the extra space between pins.
Matching the right chain to a chainsaw is easy if you have the right measurements matching the right chain to a chainsaw is a little more complicated than finding other power tool accessories, because of the unique way that chainsaw chains are measured. After matching the right size of chain there is still a host of chainsaw chain types and features to choose from and match to the application, but that’s usually much more straight-forward than finding measurements. Page is also a great way to get more familiar with chain sizes and types, even if there’s still some time before your next chainsaw chain replacement.
what is lp chainsaw chain Related Question:
What does LP mean on a chainsaw chain?
My saw is quite powerful, but it is a consumer saw that was/is designed for ‘low profile’ (lp) chain; specifically 3/8 lp 050 chain. Low profile chain is supposed to be safer because it doesn’t kick back as easily as regular chain, and being a little smaller, does not require so much torque.
What type of chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
Are there different types of chainsaw chains?
Chainsaw chains come in three main varieties. They come in full chisel, semi chisel and low profile chains, with each being used for different tasks. The chisel refers to how the teeth are cast on the chain itself – which then determines how the chain cuts through the wood.
What’s the difference between .050 and .058 chain?
058. Today there aren’t any difference between .
What chainsaw pitch is best?
Experts say the best chainsaw chain for cutting firewood is the Husqvarna High Performance 18 inches, 0.05 gauge, 0.325 pitch chain.
What is most aggressive chainsaw chain?
404 chains are the most aggressive. The 3/8 is a more flexible size with adequate strength, low weight and substantial cutting speed. It can also can handle the power of a 50-100cc chainsaw engine.
What chainsaws do loggers use?
The most popular brands known to fit this description are the Stihl, Husqvarna, and Oregon chainsaws, which are the most ideal for professional loggers. Bigger chainsaws are better for professional loggers, but they are not always the most ideal. The fact that these chainsaws are big also means that they are heavier.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
What is the difference between R56 and S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What is the advantage of a skip tooth chain?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
Can I use a different gauge chain?
Drive sprockets can drive any gauge chain, only the pitch matters.
Will a 058 chain fit in 050 bar?
050 and . 058 chains are identical except the drive tangs are reduced to .
What does 72 mean on chainsaw chain?
For chainsaw models that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 72 drive links. Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.