Check and replace bar and chain oil regularly to reduce friction, keep the saw from wearing out faster, and to make cutting easier. Be sure to use bar and chain oil, Not regular motor oil. Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.
Every time you refuel your saw you should be topping up your chain oil. A lot of chainsaws are equipped with an adjustable oil pump to increase/ decrease the amount of oil getting onto your cutting equipment. Chainsaw manufactures generally design oil tank size so that you use one tank of fuel mix to one tank of oil.
I usually go through 4 to 6 gallons on an average year, doing the tree removal thing…….I buy by the gallon as well. In the winter I used to use several quarts of 30wt. oil, but I’m going to give canola oil a try, especially if I ever get a mill for my big saws. That’s when you will see the oil consumption go WAY UP…..
how much chainsaw bar oil Related Question:
Can you put too much bar oil in a chainsaw?
Technically speaking, you can’t put too much bar oil into the fuel tank of your chainsaw (unless it’s overflowing, which would not be good). What’s important is that too much oil is not being used by the chainsaw on the bar and chain.
Can you over oil a chainsaw?
Although a chain saw always requires the moisture that oil provides during the saw’s operation, too much oil isn’t good. When the oil adjustment is set too high, the oil is subject to drip from the chain and run down the guide bar.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Can I use 2 stroke oil for chainsaw bar oil?
Can You Use 2 Cycle Oil As Bar Oil? You should only use two-cycle oil as the mix, never as a chainsaw bar oil alternative. Using two-cycle oil on the bar will not provide enough tackiness to stick to the chainsaw chain in the summer months. Two-cycle oil also will not work in the winter.
Why is my chainsaw using so much bar oil?
If there isn’t proper ventilation of the oil tank, a vacuum can occur and reduce the flow of oil to the guide bar. Correctly venting your chainsaws oil tank will allow air into the tank, and avoid a vacuum from occurring. There are a number of factors that contribute to why a chainsaw leaks oil.
How often should I oil my chainsaw?
It is recommended that you grease the bearing in the tip of the bar each time you refuel. Make sure to grease the tip at the end of the day as well to help prevent moisture from entering the bearing as the bar cools.
How long does bar oil last?
Bar oil itself lasts indefinitely; it’s the containers holding the oil that determines the shelf life. Bar oil will stay in most bottles between 3 and 7 years. The oil base determines the length of time; synthetic oils will last the longest, whereas mineral and plant-based oils have a shorter shelf life.
Do Electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.
Do chainsaws always leak bar oil?
In all but very exceptional cases there is nothing wrong with the chainsaw and what appears to be an oil leak is simply oil that has sprayed from the chain as it rotates at high speed, draining from the saw body and guide bar.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .
Is 2 stroke oil the same as chain oil?
No, it is not. 2-cycle oil is a gasoline additive that provives lubrication to the internal engine parts since the engine has no oil internally. Bar and chain oil is a much heavier viscosity intended for lubrication of the bar and chain specifically.
Can I use vegetable oil instead of bar and chain oil?
Effective – Vegetable oils have natural properties including good lubricity, resistance to shear, a high flash point, and a high viscosity index. These qualities lend themselves to chain lubricant requirements similar to petroleum-based chain oils, and do not contribute to chain or bar wear over time.
What is chainsaw bar oil made of?
Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
How do you store a chainsaw so it doesn’t leak oil?
Store your larger chainsaws on the ground or a shelf, and hang the smaller ones on the wall to keep them from being lost. Before storing your chainsaws, always make sure that the oil reservoir is empty. If it’s not, ensure to drain the oil. Must secure the plugs after every use and before storage.