If your chainsaw is smoking from the engine, then your problem is more serious, and has potential to do greater damage to the machine. Alright, now that we’ve covered the 2 groups of things that DO cause chainsaw smoke, I also wanted to mention some things that DO NOT cause chainsaw smoke. The 2 things to look at, when troubleshooting a smoking chainsaw.
Chainsaws can sometimes emit smoke for various reasons. Most chainsaws nowadays use the 1:50 oil/fuel mix, but always check your user manual to make sure as it can be different for some chainsaws. It covers the most common causes for a chainsaw overheating, and ways to prevent it from happening.
what is my chainsaw smoking Related Question:
What does it mean when your chainsaw smokes?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why is my chainsaw burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
What causes white smoke from a chainsaw?
Smoke from a bad oil-gasoline mixture The main reason for a chainsaw that emits smoke (white most of the time), is the result of a bad oil / fuel mixture or bad oil. The oil / fuel mixture is to be prepared carefully, taking into account specific percentages.
Why does a chainsaw get hot?
Engine Maintenance The piston in a chainsaw’s engine moves rapidly to generate the cycles necessary to do the work that a chainsaw does, and the engine generates heat through both combustion and friction. It dissipates this heat through the exhaust port while drawing in cooler air through the intake port.
Why does my chainsaw bar look burnt?
Over regular use, your rakers do decay a lot, and that eventually leads to heat buildup or similar issues on the chainsaw. Eventually, the chainsaw bar can be a passive source of heat buildup from improper raker height. So, the chainsaw raker depth must be accurate in order to reduce any type of overheating.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Is it worth sharpening a chainsaw?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Will cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Should a chainsaw smoke?
An abundance of smoke emanating from the engine often indicates that an excessive amount of oil has been introduced into the oil and gasoline mixture that powers the chain saw. Ensure that you’re mixing the correct amount of oil and gasoline according to the dictates of your owner’s manual.
How do you stop a chainsaw from overheating?
To prevent chainsaws from overheating they must be cleaned regularly. The cylinder and starter both contain air intake areas that pull cool outside air into the engine when it’s running. If dust, wood chips or other material blocks these systems, the engine will start to overheat.
How long can you use a chainsaw for?
What is the runtime of a Chainsaw? Depending on the type and usage, you can expect a gas Chainsaw to run between 15 and 40 min before you have to fill it up again. Most battery-powered chainsaws have a run time of up to 2 hours, but there are high-capacity power packs that will last much longer.
How hot should a chainsaw get?
How Hot Does A Chainsaw Crankcase Get? The oil conductor does not provide sufficient heat protection to keep the engine cooler; instead, the oil is more efficient at drawing heat to it instead. At temperatures over 220 Fahrenheit and occasionally as high as 220F, it often stratifies on top of an oil pan.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How often should you change the bar on a chainsaw?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.