Ideal for a demolition or concrete job site where you need to crush, chip, dig, and square things up. Grease-filled gear bo.
volts is 110 V/60 Hz; the input power is 1100W.
Hammer speed: 3900BPM (RPM); Impact Energy: 15J; Spee.
There is a drill that can go up to 1-1/2″ in diameter. Bit Type: 5/8 in. hex bits.
Among the tools in the package: 1 x 1-1/2″ Demolition Jack Hammer; 1 x Side Auxiliary Handle; 1 x Point Chisel; 1 x Flat Chisel; 1 x Key Wrench; 1 x Replacement Carbon Brushes; 1 x Heavy Duty Plastic Case; 1 x User’s Manual, which tells you how to use the tools.
Ideal for a demolition or concrete job site where you need to crush, chip, dig, and square things up. Grease-filled gear bo. Specifications. Drilling power: 1100W; Voltage: 110 V/60 Hz; Hammer frequency: 3900BPM; Impact Energy: 15J; Max. Drilling diameter: 1-1/2″/38MM; Bit Type: 17mm (5/8 in.) Hex Shank Bit. A package comes with. A Demolition Jack Hammer, a Side Auxiliary Handle, a Point Chisel, and a Flat Chisel are all included. There is also a key wrench, a pair of spare carbon brushes, and a heavy-duty plastic storage case with a user’s manual. This is a good tool for people who want to break things down.
I just got them. I ran for about two hours. When I used this tool, the job was so much easier. Even though it’s a little heavy, the weight reduces the amount of recoil. It was, in fact, a pleasure to use. I hope this thing will last for a long time.
