I never bought a recon saw before, but I thought it would be a returned saw that was fixed to original condition. A knowledgeable saw mechanic knows how the set the carburation to make the saw dependable. Anyone who says all Poulan saws are junk is ignorant of saw set up and reasonable use.
what is a reconditioned chainsaw Related Question:
How long do chainsaw engines last?
It ultimately comes down to the factors listed above (especially maintenance). That being said, you can expect a quality chainsaw to last you at least 10 years or more. But if you take care of it, I know people who have saws that have lasted 20-30 years and even longer.
What is a good chainsaw for beginners?
Black+Decker Electric Chainsaw This Black+Decker chainsaw is one of my personal favorite electrics on the market. It is great value for money, and is very beginner friendly due to one of my favorite feature. This is the automatic oiling system which does take some headache out of operating a chainsaw.
What does the T mean on a chainsaw?
The letters on the screws represent High (H), Low (L) and Idle (T). The H screw regulates the Air/Fuel mix during high RPMs, while the L Screw does the same during low RPMs. The T screw regulates how much fuel is sent to the carburettor while idling until the throttle is pressed.
How long does petrol last in a chainsaw?
Depending on the type and usage, you can expect a gas Chainsaw to run between 15 and 40 min before you have to fill it up again. Most battery-powered chainsaws have a run time of up to 2 hours, but there are high-capacity power packs that will last much longer.
What is the lightest most powerful chainsaw?
Weighing only 5.7 pounds (without bar and chain), ECHO’s CS-2511P is the lightest gas-powered rear-handle chainsaw in the world with the most power in its class, states the company.
What chainsaw do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
How often should you sharpen a chainsaw?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
Is Echo or Stihl better?
Conclusion. Echo and Stihl are both options. If you want a powerful and lightweight chainsaw, then an Echo model might be the right choice for you. Stihl makes more sense if you are after a well-built, durable, full of extra features, fuel-efficient chainsaw.
What should you not do with a chainsaw?
Don’t Cut on the Ground When Using a Chainsaw Cutting on or near the ground puts you at risk for sinking the bar into the dirt. When learning how to use a chainsaw safely, one of the first things you should do is make sure to make your cuts off the ground.
Why does my chainsaw bog down when I give it gas?
If your chainsaw is bogging down when you give it throttle, this is often a sign of improper gas-to-oil ratio. If there is too much gasoline in relation to the amount of oil used, this is known as a “rich mixture” and can cause the chainsaw to run poorly.
What is the LA screw on a Stihl chainsaw?
The LA setting on Stihl chainsaws is controlled by a screw on the outer housing of the engine that adjusts the flow of fuel and air through the carburetor. This screw is inside the engine housing on the carburetor, but is accessible through a hole or gap in the outer housing of the saw.
Why is it so hard to pull start my Husqvarna chainsaw?
If your chainsaw is hard to pull, here are some common causes: The pully system is snagged or stuck. The starter assembly is stuck or sticky. The housing may be damaged.
How long does battery powered chainsaw last?
Although runtimes will vary depending on use and the chainsaw’s size, expect to get about 20 to 30 minutes of intermittent use out of a cordless chainsaw before it needs a charge.
What fuel should I use in my chainsaw?
Use a minimum of 89 octane gasoline and always use fresh fuel. Only buy enough gasoline that you can easily use up within a two- month period. For air-cooled, two-cycle engines, use a quality mix oil that meets the engine manufacturer’s recommendations.