72.John DeereNotesBar LengthReplacement Chain SizeNumber of Drive Links8, 9, 61, 81, 91Chain length may vary depending on make of bar. 78.2036, 2040Some models used 3/8″.050 chain. “Models with chain brakes use 3/8” low profile chain.
To help you find the best chainsaw for your budget, I’ll help you figure out how to select the right chainsaw size for your needs. “If most of your chainsaw needs involve pruning small branches or trees with relatively thin branches, a 6″ to 10″ chainsaw is the tool for the job. Cutting down medium size trees with a trunk of about 14″ to 16″ will require a larger chainsaw of about 16″ to 18” to fell the tree in one easy pass.
what size chainsaw chain do i need Related Question:
How big of a tree can you cut with a 16 inch chainsaw?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
What is the most common chainsaw chain size?
Most chainsaws use 0.050″ (1.3 mm) and 0.058″ (1.5 mm) gauge chains. 0.043″ (1.1 mm) and 0.063″ (1.6mm) gauge chains are less common.
How do I choose a chainsaw chain?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
Can electric chainsaw cut trees?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What size chain is on my Stihl chainsaw?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Does any chain fit any chainsaw?
No, chainsaw blades are not universal, not every bar and chain will fit on your machine. Chainsaw chains need to have the correct specification to fit on your bar. If you have a chain that is too long or too narrow it will not fit. Mixing brands of chains is no problem as long as they are compatible.
How thick of a tree can an electric chainsaw cut?
WEN 4017 Electric Chainsaw, 16″ With 12 amps of power, this corded chainsaw from WEN features a 16-inch bar capable of cutting through small trees and branches up to 14 inches in diameter.
Do you need oil for an electric chainsaw?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.
Is an electric chainsaw any good?
Electric chainsaws are great for all your residential cutting, pruning, trimming, shaping, or simply for clearing branches. They’re safer and much healthier for the environment than a gas-powered chainsaw. These chainsaws are easier to operate and handle due to their lightweight.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.