Of course, STIHL Approved Dealers will always be happy to sharpen a chainsaw chain for you and if the chain is damaged at all, then replacing the chain or the damaged cutting teeth, is the best course of action, so again, just pop into your nearest STIHL Approved Dealer. It’s really important to make sure the depth gauge is filed too, as it is the difference between the height of the cutting teeth and the depth gauge which determines how much wood is taken out by the chain. If you are working with a battery or electric chainsaw, make sure you remove the battery or unplug it before sharpening so it can’t be accidentally started, then release the chain brake so you can move the chain freely.
XTo sharpen a dull chainsaw, clamp the bar of the chainsaw to your work station and tighten the chain using the tension adjusting screw to make sure it won’t move. Use a permanent marker to draw a line on the link where you’re going to start filing, and get a specialty chainsaw file that’s the same diameter as the chainsaw teeth. To file, hold the file between the teeth at a 30 degree angle, and slide it across the face of the cutter 3-10 times until it is sharp.
Since saw chains have cutters that alternate orientation along the chain, you need to use a chainsaw sharpener on all cutters on one side, then swivel the chain holder and tackle those pointing the other way. An electric chainsaw sharpener is ideal for this kind of periodic chain maintenance, though you will need to change the abrasive wheel to an extra-wide version made for this work. No matter how you use a chainsaw sharpener, it makes sense to keep an extra chain or two on hand, sharp and ready to go as you’re working in the forest.
Sharpening a chainsaw may sound intimidating, but we promise it is not! We have everything you need at Owenhouse Ace Hardware to sharpen your chainsaw yourself. No one does power equipment like we do at Owenhouse Ace Hardware! We have an entire department set up, our Power Equipment Department, with all the brands and parts you need to keep your yard cut, trimmed, and beautiful! Our expert team at ACE Hardware is your go-to in Bozeman, Montana to help you sharpen your chainsaw to keep it working efficiently and safely. Whether you are looking to buy your first basic chainsaw for simple yard maintenance or a commercial chainsaw you will use every day for work, we have you covered! One of our expert chainsaw technicians will help answer any questions you have and make sure you have everything you need!
where to sharpen chainsaw chain Related Question:
How much does it cost to sharpen chainsaw chain?
A typical chainsaw can be sharpened up to 10 times before it’s time for a replacement. The cost to have a chainsaw sharpened ranges from $13 to $16. The average cost per chainsaw sharpening is $14.50 for people who choose to have their chainsaws professionally sharpened.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Does Ace Hardware sharpen chainsaw chains?
Our experienced professionals will machine sharpen your chain saw for pitch-perfect cutting edges: tooth-after-tooth. Bring your chain saw into Steadman’s Ace Hardware and let one of the friendly, experienced mechanics give it a tune up.
Is it better to sharpen or replace a chainsaw chain?
Sharpen before replacing In general maintenance of a chainsaw is important because it can help prolong the lifespan of the different parts of your machine, as well as the machine itself. If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had.
Why does my chainsaw chain get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How many times can you sharpen a chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
How long should a chainsaw chain stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
How do you clean a chainsaw chain before sharpening it?
We soak them for an hour, or overnight in Lye (drain cleaner), purchased in a can, dry powder form at a hardware store. Next, we scrub the chain on a flat surface with hot water, dish soap and a coarse brush. Rinse, pat dry, and sharpen the cutters. The rakers are checked for height and ground down, if necessary.
Do you flip the bar on a chainsaw?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
Why does my chainsaw bar smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Is it OK to cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
Why does my Poulan chainsaw dies when I give it gas?
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the chainsaw engine to stall.