When you have to sharpen your chainsaw chain dependent on the quality of the chain and how often you use it. It is good to note the life expectancy of a chainsaw as that determines how often you need to sharpen it. The professionals use grinders to remove the imperfections from the chainsaw so, ensure a grinder is not used regularly to sharpen your chainsaw chain.
The life expectancy of a chainsaw chain is determined by it’s use and maintenance, not by a pre-determined timeline or expiration date. Second, if I sharpen a chain and only take off 50% of the metal that you do when you sharpen, then that would mean I can sharpen my chain 50% more times before discarding it. If you sharpen a chain past those lines, you risk the chain falling apart, or even flying off the chain while you’re using it.
New chains can get expensive, but fortunately, you can sharpen your own chainsaw with just a couple of simple, low-cost tools. It is important to sharpen your chainsaw because a dull chainsaw forces you to press harder on the saw, a dangerous move. Examine the Chain Before sharpening the chain, first remove it from the chainsaw and examine all parts of it.
File Sharpening Using a file to hand sharpen a dull saw chain might seem like a very slow way to go. Bench-Top Sharpeners If you use a chainsaw all year-round or if you own more than one chainsaw, then you can save a significant amount of time and energy by sharpening the saw chains with a bench-mounted sharpener. A bench-top sharpener is certainly the quickest, most accurate way to sharpen a saw chain, but just as importantly it makes it nearly impossible to ruin a saw chain by grinding away too much material.
when to sharpen chainsaw Related Question:
How do you know when your chainsaw needs sharpening?
Pay attention to the chainsaw debris. If the saw is spitting out dust instead of sharp wood chips then it likely needs sharpening. Similarly, if you find that you need to put more physical effort into cutting through wood, then this is a sign that the teeth on the chain are dull.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How many times can a chain be sharpened?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape.
Is my chainsaw chain dull?
When cross cutting (against the grain of the wood) a dull chainsaw chain creates fine sawdust instead of coarse strands. The saw is producing smoke even when your chain is oiled and the chain tension is correct. The chainsaw produces an uneven cut. This could mean that your chain has dull cutting teeth on one side.
How often should you change a chainsaw chain?
The chain sprocket must be replaced if the depth of the wear marks reaches about 0.5mm, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on.
Is it better to sharpen chainsaw chain or buy new?
Sharpen before replacing If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had. This is why, where possible, you should be looking to keep the will be chain sharp, as sharpening a better course of action than sourcing a replacement.
How much does it cost to have a chainsaw sharpened?
A typical chainsaw can be sharpened up to 10 times before it’s time for a replacement. The cost to have a chainsaw sharpened ranges from $13 to $16. The average cost per chainsaw sharpening is $14.50 for people who choose to have their chainsaws professionally sharpened.
Why do loggers run upside down bars?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
Does wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Why does my chainsaw bar smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
How do you clean a chainsaw chain before sharpening it?
We soak them for an hour, or overnight in Lye (drain cleaner), purchased in a can, dry powder form at a hardware store. Next, we scrub the chain on a flat surface with hot water, dish soap and a coarse brush. Rinse, pat dry, and sharpen the cutters. The rakers are checked for height and ground down, if necessary.
How long should a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Why does my chainsaw not cut?
The most common cause of a chainsaw that won’t cut properly is a dull cutting chain. Try sharpening or replacing the chain. The chain may not have the proper amount of tension. If the adjustment screw is too loose, the chain may not make good contact with the wood.
How tight is too tight for chainsaw chain?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.