SOLVED: Chainsaw bogs down when trigger is pulled – Fixya. Loading…. Oops :Please try again.
If your Stihl chainsaw starts up with a reassuring puttering sound, but dies when you pull the throttle trigger, there likely is an issue with the fuel, but the carburetor could need adjustment. Many chainsaw operators first notice a problem with chainsaws bogging down when they’re using the chainsaw under load, and this is usually the result of poor air circulation. A clogged fuel filter is often caused by leaving old fuel in the chainsaw.
Fuel stabilizers are a must-have for any chainsaw owner who fancies leaving their equipment idle. Sparkplugs are a litmus test to the fuel economy of your chainsaw. Replacement of carburetor is the best option if you have an old chainsaw.
The last thing anyone wants is a saw that purrs when idling and bogs down when applying gas. This guide will explore some of the reasons why you chainsaw bogs down as well as the different ways to fix it. Before making adjustments to your carburetor’s high-speed screw which is highly discouraged by most chainsaw manufacturers you should clean the spark arrestor and air filter.
chainsaw bogs when pull trigger Related Question:
Why does my chainsaw stall when I give it gas?
Carburetor Adjustment An engine stalls when it’s getting too much or not enough fuel from the carburetor. Stihl chainsaw carburetors usually have three adjustment screws: one each for idle, low speed and high speed. If the saw stalls while it’s idling, adjusting the idle screw, which usually is marked LA, should help.
Why does my Stihl chainsaw bog down when I give it gas?
The Job of the Carburetor One controls the fuel mixture when the engine is idling, one controls it when the engine is operating at low speed and one is for high-speed fuel control. When the saw bogs down during cutting, it’s usually the high-speed screw you need to adjust.
Why does my chainsaw lose power when cutting?
The spark plug is designed to provide the spark that ignites fuel in your chainsaw’s combustion chamber. Over time, spark plugs can become weak, and will not provide an adequate spark. This will cause your chainsaw’s engine to lose power.
Why does my Husqvarna chainsaw dies when I give it gas?
A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the chainsaw engine to stall.
Why does my chainsaw only run with the choke on?
When your chainsaw only runs if the choke is on the problem, in most cases, is a result of fuel supply problems or a faulty carburetor. To fix the problem you should check and clean the fuel system and carburator.
Why does my chainsaw keeps stalling?
A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the chainsaw engine to stall.
What does a spark arrestor do on a chainsaw?
The spark arrestor on your chainsaw prevents dangerous hot sparks from igniting fires while you’re working. If the arrestor is clogged or dirty, however, it will also prevent exhaust from leaving the motor, which can prevent it from running.
Why does my chainsaw rev too high?
The throttle valve (butterfly) simply cuts off the supply of combustible air/fuel and the engine stops. If this adjustment is set too high, the high idle speed will cause the centrifugal clutch to engage and the chain will run. This is a dangerous condition and should never be allowed.
Why does my Stihl chainsaw loses power?
When your Stihl MS 170 chainsaw drops its power under full load, it generally means there is an improper mixture of fuel and air in your carburetor. When you depress the trigger, a vent on the carburetor opens, allowing more gas to reach the mixing chamber.
Can you run a chainsaw without a spark arrestor?
We can’t run without arrestors here, and the fire danger is so high I wouldn’t anyway. There is less restriction without it, but cleaning them from time to time helps a lot. If it’s hot and dry, I wouldn’t risk it.
Why does my chainsaw start but wont stay running?
A clogged fuel filter will starve your chainsaw’s engine, and it can also damage it by letting contaminated fuel into the engine. Bad fuel can also clog the carburettor. Clogged carburettors are one of the most common reasons why a chainsaw won’t stay running or start at all.
Will a chainsaw run without a fuel filter?
While it’s possible to run your chainsaw without a fuel filter, but this is not recommended. When a fuel filter is clogged, it can cause considerable damage to the engine and leave your chainsaw unusable.
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
How do I know if my chainsaw spark plug is bad?
If it’s not producing any sparks at all, your chainsaw needs a new plug. If there are only a few sparks coming out of one side of the electrodes but none on the other side, it’s not bad enough for you to worry about, but it will affect your performance.
Should I remove spark arrestor?
You can safely remove the spark arrestor or even install an aftermarket exhaust system on many ATVs without having to make alterations to your jetting because they are normally set up to run a bit rich from the factory, but this is no general rule!