⚙【GRBL Z-probe】CNC Router Tool Setting Automatic Tool Setter. The thickness: 1.6mm.
♥【Thank you! .
Please let us know if you don’t like this tool. We’ll give you a refund or a return.
It is called the “Tool Setting Function. It can find the working surface very well, and is best for engraving on PCBs.
Easy to Us.
If you want to see how it should be used, you can look at our video.
It’s time to change the Probe command in Grbl to: G91G21G38.2Z-40F100 G92Z1.6 G0Z1.
Grbl Z-probe for 3018Pro/3018Pro-M/3018MAX Engraving Machin.
Please watch the video for more information on how to do specific things.
Descriptio.
It is made of wire, plastic, and aluminum.
How do I use.
As you can see, the alligator clip is stuck to the end of the cutter.
There is now a DuPont port that is connected to the board that controls everything (A5 interface on the 3018pro control board.
Plastic and aluminum plates should be placed on top of the tool to keep it steady.
In Grbl, the Probe Command setting is set to.
G91G21G38.2Z-40F100;G92Z1.6;G0Z1.
♥♥.
If you don’t like this tool, please let us know. “Thank you so much! I’m very grateful. ♥♥.
Seems to have updated the solder point on the plate, to a plug style. A quick check to make sure I’m wired it right seems to be working.
Is now getting a false zero all the time. It worked great at first. Tried to reach out to maker who only responded to tell me it isn’t their fault and make sure I have the right thickness in the code.
When I tell my machine to find zero, it starts and stops right away because it thinks it hit zero. It takes about five or six times to mess with the wire at the plug on the plate to get a reading.
