Do your best to get the sharpening angle right so that you don’t dull the chainsaw blade too fast. Another thing to keep in mind is that cutting dirty wood might dull the chainsaw blade faster. You can’t expect the chainsaw blade to dull at the same rate every time because you’re likely doing different jobs that will take a different toll on the sharpness of the blade.
Your chainsaw blade gets dull so fast because your chain is hitting the ground, the tree is filled with dirt, and/or the bar is bent. A dull chainsaw blade will lead to wear of different components of the saw, including the clutch and engine since they would have to work harder because of the blade’s dullness. If you are cutting firewood that has been left on the ground, you would need to sharpen your chainsaw more often as the accumulated dirt would dull your blade faster.
The chain is what actually does the cutting but many chainsaw owners don’t understand why their chainsaw chain dulls so quickly. If your chainsaw chain is used for cutting ice or wet wood, then you might want to consider a stainless steel chain. In this blog post, we have discussed why your chainsaw chain may be dulling quickly and some ways to reduce and extend the life of your chain.
“I have a Remington Rodeo 51cc Gas Chain Saw chainsaw.I use the following chains: – Oregon 18-Inch Pro-Guard Chain Saw Chain Fits Craftsman, Echo, Homelite, McCulloch, Poulan H72.- Oregon 20BPX072G Micro-Chisel Saw Chain.325-Inch Pitch.050-Inch Gauge 72 Drive Link Count. My problem is as follows. The chain goes dull WAY fast. Without exaggerating, when I put a brand new chain on the saw, I can saw maybe one or two 20 inch diameter PINE trees, before the before the saw stops auto-feeding, and cutting properly. Earlier today I put the”Oregon Pro-Guard” chain on my saw, validated the chainsaw had enough bar and chain-oil and tried cutting a 16-inch diameter Red Oak. Do some night cutting!!!! I wonder how many sparks you will see. Ok lets see a picture of the dull chains…. and the naked bar if possible from an end sighting down.
why chainsaw dulls quickly Related Question:
Why does my chainsaw chain stretch so fast?
Why Does My Chainsaw Chain Get Loose So Fast? One of the most common reasons why the chainsaw chain gets loose so fast is because of wear off caused by time and usage. If you are using an old chainsaw, you will notice that the chain gets loose very frequently thanks to wear on both the chain and the sprockets.
How long should a chainsaw chain last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
How long should a chainsaw chain last between sharpening?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Can a chainsaw chain stretch too much?
Chainsaw chains stretch during normal operation and begin to sag on a saw’s guide bar. If a chainsaw chain is allowed to become too loose, it can easily come off the bar during operation and create an unsafe situation for the user. Chainsaw chain tension should be checked and tightened often.
Why does my chainsaw chain keep loosening?
Chain Not Set Properly One of the most common reasons why your chain might be coming loose is because it was not set properly. When you go through the steps to tension your chain, you need to finish those steps by setting the tension so it won’t change as you work your saw.
How many times can a chainsaw chain be sharpened?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why does a chainsaw cut crooked?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
Do chainsaw chains have a master link?
Locate the master link that most manufacturers install to make removal of the chain a simple process. A visual inspection of the chain will reveal the master link due to its appearance that makes it stand out slightly from the other links.
Can I use vegetable oil instead of bar oil?
Effective – Vegetable oils have natural properties including good lubricity, resistance to shear, a high flash point, and a high viscosity index. These qualities lend themselves to chain lubricant requirements similar to petroleum-based chain oils, and do not contribute to chain or bar wear over time.