Most of the time when a saw won’t cut straight, it’s caused by a problem with the saw chain. Most of the time, when a saw won’t cut straight, the chain is the culprit. Since a saw chain is a “Team” of cutter teeth, the cut will pull in the direction of the side whose cutter teeth take the biggest bites.
If a chainsaw cuts at an angle rather than cutting straight, then the problem most certainly lies in the guide bar and chain assembly. Adjust the chainsaw bar: If possible, adjust your chainsaw bar on a bench before continuing. Use a bar cleaner handle: A bar cleaner hook tool removes debris stuck in the bar’s rails.
Your chain will have links on both sides of the chain. As I mentioned earlier, the chain is most likely the root cause of your problem, but if that’s not it, then it could also be your chainsaw bar. Use your gauge tool to clean the oil hole on both sides of the bar, to keep your chain running smoothly.
When the saw teeth become chipped, damaged or dull, the chainsaw likely won’t cut straight, especially if more teeth are affected along one side of the chain. Sharpen the teeth uniformly using a file and file guide, or take it to professional for sharpening. Madsen’s recommends using a grinder rather than a file, if you want to avoid taking it to a professional.
why chainsaw does not cut straight Related Question:
Why does my chainsaw keep cutting at an angle?
Uneven top plates can cause a chain to cut crooked. It’s important to keep all top plates equal length. Dull cutters damaged by rocks can cause a chain to cut crooked. It’s important to remove all damage from cutters prior to cutting.
Why does my saw not cut straight?
The primary reason why a miter saw might not cut straight is an inability to clamp the material down. The machine is designed to pull the material towards the blade during each cut, and if there’s a malfunction in this process, it might result in inaccurate cuts. Other reasons are: damaged blade.
How do you fix uneven wood cuts?
Usually, the fixing method is to fill the gap with lots of glue and wood filler. But here’s a better method, take a small piece of wood and put it in the gap. Then glue it in the right place and clamp it to the side of the tenon. Make sure that you have arranged the grain of the wood.
Why does my chainsaw smoke when cutting?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Can you cut with both sides of a chainsaw?
A chainsaw is one of the most versatile tools you can own, but it cuts both wood and flesh equally well.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Is it OK to cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
How often should you change the bar on a chainsaw?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
Can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
What’s the safest chainsaw?
Enter the WORX JawSaw. It’s one of the safest chainsaws out there—the blade and chain retract until they’re fully enclosed in the guard, preventing any unfortunate accidents! It can cut or trim anything up to four inches in diameter, and the auto-tension feature ensures you have optimum tension at all times!
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.