Your gas chainsaw engine starts, but the chain won’t move. Check out the ‘Removing/Replacing the Guide Bar and Chain’ section in your gas chainsaw manual. A dirty air filter can affect your gas chainsaw’s ability to cut.
Take the guess work out of your repairs with our Fix app. Tap to download and it’s as easy as snapping a photo to find repair parts guaranteed to fit.
why is my chainsaw not spinning Related Question:
Why does my chainsaw blade not turn?
If the chain is too tight, the blade may not spin when the throttle is engaged, which can cause damage to the clutch or other associated parts. Keep in mind that the tension of the chain will change with heat. As the chainsaw is used and the chain heats up, it will become loose.
How do you know if your chainsaw clutch is bad?
Does the engine loose revs, or the engine keep revving and just the chain stops? If the engine is still running at normal revs, and the chain slows down, then it’s a problem with the clutch. Worn out, gummed up, jammed springs etc. If the engine looses revs under load then it’s more likely a fuel or carb problem.
Is my chainsaw seized?
If you want to know if your chainsaw has seized, it really is quite simple. A chainsaw that has seized will end up stopping in the middle as you are using it, similar to how a car will end up stopping in the middle of the road whenever there is something wrong with it.
Why is my chainsaw jamming?
Here are our explanations! Indeed, whether it is a chainsaw electric ou thermal, it is the teeth of its links that come into direct contact with the wood and the materials to be cut. As a result, dirt, wear on the guide or links and even the motor can be the cause of jamming.
How much does it cost to fix a chainsaw?
THE AVERAGE CHAINSAW SERVICE IS $100 TO $125 If we can find ways to help save you money, we will suggest them to you. If we do not feel it is worth repairing, we will tell you so.
How can you tell if a centrifugal clutch is bad?
When heat damage occurs, the clutch will never disengage and the machine will start taking off by itself as soon as you start the engine. You can see heat damage inside the clutch drum, the metal turns from black to a blue color. The clutch must be replaced if it has heat damage and won’t disengage.
How do you know if your chainsaw sprocket is worn out?
The chain sprocket must be replaced if the depth of the wear marks reaches about 0.5mm, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on.
Do you start a chainsaw with the brake on?
When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
What does a chainsaw service include?
Chainsaw Servicing comprises Brigss and Stratton engines are the most commonly found petrol engines on todays garden machinery, and we cater for the service and repair of engines, as well as the supply of service items such as spark plugs, air filters, fuel filters and oil filters.
How much does it cost to service a Stihl chainsaw?
Service Description. General service is $49.50 labor plus parts (Air filter, fuel filter, spark plug, chain etc)