Important distinction: bar and chain oil is not the same as the engine oil that is mixed in with chainsaw fuel. The oil outlet port is where the oil from your oil tank leaks out into the oil hole on your chainsaw bar. If you see no oil AND you know your oil tank is full AND you’ve already thoroughly cleaned the oiler, then you have a problem with your oil pump or oil line.
Take the guess work out of your repairs with our Fix app. Tap to download and it’s as easy as snapping a photo to find repair parts guaranteed to fit.
The chain and guide bar oiler on your Stihl chainsaw is an essential component of the saw. It’s simple to check whether or not the oiler works properly: Hold the chainsaw over a flat surface, such as a tree stump, engage the throttle and look for oil drops coming from the spinning chain. The absence of these drops may mean that the oil port is blocked.
chainsaw won’t oil chain Related Question:
How do you adjust a chainsaw Oiler?
To increase the oil flow, turn the automatic oiler adjustment screw counterclockwise. To decrease oil flow, turn the automatic oiler adjustment screw clockwise. While always wearing heavy work gloves, grasp the chain and pull it towards the nose of the chainsaw to ensure that the chain moves freely.
How do I know if my chainsaw oil pump is bad?
Generally speaking, the signs of a chainsaw oiler problem are easily spotted. If the chainsaw seems like it’s getting too hot or producing smoke, that is a sign that there is an oil deficiency in the chain. This is not good for the life of your chainsaw. If you spot this problem, it is time to troubleshoot the issue.
How do you clean a chainsaw oil pump?
Clear any sawdust, congealed lubricant and dirt out of the oil outlet hole on the guide bar. Keep the oil pump tank clean: even if it is equipped with a filter, wipe away all dirt around the cap before refuelling. Regularly check and clean the tank vent and the filter itself.
Do chainsaws always leak bar oil?
In all but very exceptional cases there is nothing wrong with the chainsaw and what appears to be an oil leak is simply oil that has sprayed from the chain as it rotates at high speed, draining from the saw body and guide bar.
Why is my chainsaw using so much oil?
What causes a chainsaw to leak oil? As the oil is pumped from the tank through to the guide bar, air begins to replace the space where the oil was previously stored. If there isn’t proper ventilation of the oil tank, a vacuum can occur and reduce the flow of oil to the guide bar.
Can I use WD40 as chainsaw oil?
No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant. WD40 is primarily a solvent or rust dissolver.
Is chainsaw oil the same as motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can you use regular oil for chainsaw bar?
Whether you use bar and chain oil, traditional motor oil or a vegetable oil-based lubricant, always make sure you’re using fresh oil when you fill your chain saw’s bar oil reservoir. Never use waste oil that you drained from your car or boat.
How do I know if my oil pump is working?
Listen to your engine while your vehicle is running to see if you hear any high-pitched whines or clinking and clattering noises. Even if you hear the noises slightly, check the oil pressure on your pump to make sure it’s working properly.
What happens when an oil pump fails?
low oil pressure a worn or failing pump will cause a loss of oil pressure. when this happens, internal engine components, such as bearings, camshafts and crankshafts, are starved of pressurized oil. when this happens, the engine will quickly get damaged.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Do Electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.
Can I use gear oil as bar oil?
Unless you are using your chainsaw in hot conditions, gear oil is not a recommended alternative bar oil.
Why is my chainsaw blade smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.