You can make a level cut with your chainsaw using this simple technique. Stumps, logs, and telephone poles can be used as work tables or supports, but they require a flat surface-which is difficult to achieve using a chainsaw. The key to making this work without the chainsaw digging into the jig as you slide it across is to attach two thin wood strips to the chainsaw bar.
This video will show you how to make a level and straight cut with a chainsaw. I use the chainsaw to cut an old telephone pole to the right height so I can use it as a pedestal for an anvil for welding projects. It worked out really well so check out the how to and basic tools you’ll need make a clean and level cut with a chainsaw.
Luckily, with a few tips and tricks it’s easy to learn how to cut wood slices with a chainsaw – and stay safe in the process. By far the simplest way how to cut wood slices with a chainsaw is to just cut the log. Another way how to cut wood slices with a chainsaw is to cut the slices first and then level them out later.
Unless you’re a professional chainsaw carver, here are a couple suggestions for making an even cut from a tree service expert. If having a perfectly even cut you may want to create a guide for yourself either using sheet metal wrapped along the log and aligned to your marks, or even create chalk guide line with a plumb line. The third way to make a level cut is to not worry about it, eyeball your chainsaw cut and then level it out later.
how to cut level with a chainsaw Related Question:
Why does chainsaw cut to the left?
If the chain is cutting to the left that means the right teeth on the chain are longer, and vise versa. To correct, sharpen only the side with the longer teeth. If the bar has worn unevenly it will also cause the chain to not cut straight.
Can you cut the ground with a chainsaw?
Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.
What makes a chainsaw cut on an angle?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
Can I use chainsaw on tree roots?
Once you’ve sliced the stump almost all the way to the ground, continue cutting it — and the soil — diagonally and at different angles. Don’t go more than a foot into the soil. Chainsaws are powerful machines, and you don’t have to worry about dirt damaging it or knocking the chain off.
What should you not do with a chainsaw?
Don’t Cut on the Ground When Using a Chainsaw Cutting on or near the ground puts you at risk for sinking the bar into the dirt. When learning how to use a chainsaw safely, one of the first things you should do is make sure to make your cuts off the ground.
Which cut is when you cut a straight 90 degree across the grain?
A crosscut is a straight, 90-degree cut that cuts across the grain of the wood. Usually, that means turning long boards into shorter ones. On a table saw, you will usually use a miter gauge to make crosscuts. It’s the most basic cut you can make.
What is the best angle to sharpen chainsaw chains?
Always file at right angles to the guide rail. The right sharpening angle depends on the saw chain and the wood that you want to cut. The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle.
Why does my chainsaw burn the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Why do loggers run upside down bars?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
Why does my chainsaw bar smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Can a chainsaw cut a 4×4?
While the best way to cut through a 4×4 is by using a 12-inch miter saw or a 10-inch radial saw or slide saw, those tools aren’t always readily available. With a little ingenuity, it’s possible to make precision cuts with other tools, including circular saws, reciprocating saws, chainsaws, and even handsaws.
Can chainsaws cut through steel?
Yes, chainsaws can cut through metal. Of course, this depends on the type of metal and thickness. You also need a powerful chainsaw with a chain that has metallic reinforcement or a carbide-tipped chain. In general, it is not advised to use a chainsaw to cut metal, use a specialized metal saw instead.