Plus, from a safety perspective: if the chain is backwards all the cutters are facing you! Chain direction is not rocket science, but it’s very important for running a chainsaw effectively. Follow these 4 steps to get your chainsaw chain headed in the right direction. If any of this chain component terminology is unclear to you, or if you’re just interested to learn more, check out this in-depth explanation of the anatomy of a chainsaw chain.
Getting the chainsaw chain direction right is very straightforward. In the chainsaw chain direction picture below, the Husqvarna 450 powerhead is on the right and the tip on the left. You can also see the chain direction when looking at the bottom of the bar, facing back toward the powerhead. Hopefully, that makes things clear and you won’t end up with a chainsaw chain on backward!
The most terrible thing which can happen to you is when you put in your chainsaw chain in the wrong direction and begin your task, only for the chainsaw to get blocked in the middle of the project. The direction of the chainsaw blade is always the same regardless of the type or model of chainsaw. “The size of the pitch depends greatly on the type of chainsaw you are using. If your chainsaw is one for heavy duties, then you will have a large pitch. The pitch of a chainsaw is basically the distance between any two repeated chain links divided by 2, that is, the average distance between two successive chain links. So, before purchasing a new chain, make sure it fits the exact pitch so as to avoid ineffectiveness. There are some chainsaw pitches that are most commonly used. They include ¼”, 0.325″, 3/8″, 3/8″ low profile and 0.404″.
Putting a chain on a chainsaw the right way is a rather important step in properly using your chainsaw. The easiest way to replace or correct a chain on a chainsaw after you’ve taken the machine apart is to start by reattaching the chain bar to the body of the chainsaw. Again, if the blades of the chain are not facing the correct way, you will think the blade is dull because it is cutting in the wrong direction.
does ego chainsaw come with oil Related Question:
Does ego chain saw come with oil?
EGO Power+ CS1600 16-Inch 56V Lithium-ion Cordless Chainsaw – Battery and Charger Not Included & Oregon 54-026 Bar and Chain Oil, 1 Quart.
What oil does the ego chainsaw use?
OVERVIEW. The EGO POWER+ 32 Fl Oz Premium Bar and chain lubricant is recommended for use with EGO POWER+ Chain Saws to extend bar and chain life for superior performance. The premium oil-free formula outperforms traditional bar and chain oils and is 100% bio-based and biodegradable.
Does a new chainsaw need oil?
To run properly, all chainsaws need two types of oil for different jobs. The first is engine oil. The chainsaw shown here has a two-stroke engine, so it needs two-stroke engine oil mixed with the fuel to help cool and lubricate the moving parts inside the motor.
Do battery operated chainsaws need oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.
How long does an ego chainsaw battery last?
Due to their high capacity, all EGO batteries can be stored unattended for a minimum of 10 years without damaging capacity and cycle performance. After 30 days batteries discharge to 30% capacity (to ensure longevity).
Do All EGO products use same battery?
Yes! ALL type of EGO batteries are interchangeable to all equipment. The only difference are the run times.
Who makes ego chainsaw?
Ego Outdoor Power Equipment is made by Chervon, a Chinese company with manufacturing plants in Nanjing, China, and Stuttgart, Germany. Their USP is making battery tools that are as powerful as gas ones. Many reviewers agree, giving their chainsaws 4.5 out of 5 stars.
Is chainsaw oil the same as motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Does a chainsaw need chain oil?
To work properly, chainsaw chains and bars must be lubricated.In the past, most operators have used petroleum-based oils. When a chain saw is used, virtually all of the lubricant ends up in the environment. Every year thousands of gallons of chain-and-bar oil are carried into the forests and none returns.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Can you use vegetable oil in an electric chainsaw?
Kitchen oils are not necessarily designed for use on a chainsaw in the long term which could cause maintenance issues, so we’d recommend the use of a vege oil designed for your chain.
What is special about chainsaw oil?
Chainsaw bar oil is lubricant that is designed to reduce friction between the chain and bar. An oil reservoir releases the oil onto the bar.
Can you use wd40 on a chainsaw?
Step 5: Lubricate Your Chainsaw Before you put the chain back onto your chainsaw you will have to lubricate it to clean it, using WD-40® Multi-Use Product. Before refitting the chain into the chainsaw, wipe off all the excess residue and then reattach it to the guide bar.
How many cuts is an ego chainsaw?
Comparing the EGO CS1400 Battery-Powered Chainsaw In terms of cut time, we made over 18 cuts through our 40-foot tall 14-inch palm tree on a single charge.
How much do ego chainsaws weigh?
Chainsaws. This 14-inch, 56V, battery-powered chainsaw from EGO weighs 14 lbs. It has a chain brake, a tool-less bar adjuster, and a 5 year warranty.