Chainsaw chains are made up of drive links and cutters that rotate at high speed around a chainsaw bar to cut wood. The best chainsaw chain for you depends on the type of chainsaw you own, your cutting experience, and the type of wood. Designed to fit smaller 10-inch DIY and landscaping chainsaws, the Oregon R40 AdvanceCut Chainsaw Chain meets ANSI standards for low-kickback chains.
Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw. Stihl typically sells chains with one of three pitch measurements: 3/8-inch,. The Stihl MS 461 is one of the best Stihl chainsaws around.
The chainsaw should come with a scrench for basic maintenance. Read the owner’s manual to find out the saw’s grease requirements. The saw might have come with a semidisposable grease gun sized for chainsaw lubrication.
Depending on what promotions Stihl is offering and how generous your dealer is, you may get any or all of a case, chain, baseball cap, file, file handle, oil for mixing with the fuel. The dealer will add another Stihl chain, maybe a Carlton or Oregon chain also. At times the customer also get some other Stihl gift item(at the dealers’ expense) such as a key chain, goggles or a pair of gloves.
Every chain is made of links; your saw’s chain has three types: cutting teeth, drive links, and tie straps. At the end of the day, it’s important to remember the pitch and gauge of your original chain and to consider what types of cutting you plan on doing with your saw when choosing your replacement chain. Deciding what types of cutting tasks you’ll be performing with your chainsaw will help you decide which saw tooth profile and cutting tooth spacing is best for your saw and its intended work load. Now that you’re educated and know what you’re looking for, check out our selection of chainsaw chain and guide bars!
do chainsaws come with the chain Related Question:
What comes with a chainsaw?
The chainsaw should come with a scrench (a combination screwdriver and wrench) for basic maintenance. (If you’ve already lost it, you can always get a replacement like this one from the Oregon company. You’ll also need a basic sharpening kit and depth gauge, sized for your specific saw and chain.
Do chainsaws come with a sharp chain?
Yes, the chains of the chainsaw come sharpened from the factory when you buy a new one. There is no need to sharpen it before your first job. But even the sharpest chain for the chainsaws available in the market will lose their sharpness over time and grow very dull.
Does a Stihl chainsaw come with the chain?
As sold by Stihl, and before anything is added by the dealer, a chainsaw comes with the powerhead, one bar, one chain, one scrench (bar wrench and screwdriver all in one), an owners manual, and sometimes a screwdriver for the carb.
How much does a new chain for a chainsaw cost?
The average price for Chainsaw Chains ranges from $10 to $40.
Who uses a chainsaw?
It is used in activities such as tree felling, limbing, bucking, pruning, cutting firebreaks in wildland fire suppression, and harvesting of firewood. Chainsaws with specially designed bar-and-chain combinations have been developed as tools for use in chainsaw art and chainsaw mills.
How long do chainsaws stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Are chainsaws supposed to leak oil?
In all but very exceptional cases there is nothing wrong with the chainsaw and what appears to be an oil leak is simply oil that has sprayed from the chain as it rotates at high speed, draining from the saw body and guide bar.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
How do you buy a chainsaw chain?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
Are there different types of chainsaw chains?
Chainsaw chains come in three main varieties. They come in full chisel, semi chisel and low profile chains, with each being used for different tasks. The chisel refers to how the teeth are cast on the chain itself – which then determines how the chain cuts through the wood.
Are all 14 chainsaw chains the same?
The size of a chain saw’s chain does not always correspond to the size of the guide bar. Determining the correct size of chain for a chain saw with a 14-inch guide bar involves several factors, including the size of the drive lugs and their distance from each other along the chain.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
Can you use a chainsaw on a ladder?
Never operate a chainsaw on a ladder, and never cut limbs that are higher than your shoulder. (If you’re looking to cut something higher, consider an altogether different tool: a manual rope saw, often called a pocket chainsaw.)
Why did they make chainsaws?
Two doctors invented the chainsaw in 1780 to make the removal of pelvic bone easier and less time-consuming during childbirth. It was powered by a hand crank and looked like a modern-day kitchen knife with little teeth on a chain that wound in an oval.
What is slashing with a chainsaw?
A log bound chainsaw is dangerous, and carefully removing it is again, why you hire tree experts. Brushing and Slashing – This is the fun part! This is when you run around cutting all the small trees (5” in diameter or less) and brush out of the way as fast as you can.