voltage is 100V, frequency is 50/60Hz, power consumption is 650W, weight is 1.35Kg, rotation number is 2800rpm, no-load rotation number is 3000rpm, trolley chuck diameter is 6.35mm, and it’s for special use.
Designed to be a high-efficiency and practical electric pruning tool, this tool has an all copper motor that can keep the temperature high and reduce the amount of heat that is generated by using it longer. Using a transparent and adjustable base, the truck can be seen and cut off right in front of you to make it easier and more accurate to run.
Beginner’s Power Tool: With no load speed, the 3000rpm copper motor with no load speed can provide maximum power to meet the most demanding woodworking needs. It is made of high-quality plastic, has a power switch, and has a rubber handle with a non-skid pad on the end. Get out of DIY as if you were a novice.
It can be used for chamfering, grooving, trimming, drilling, carving characters, arranging processing, and many other things.
When you open the box, you’ll find 12 1/4″ Shank Woodworking Router Bits Set (a bonus gift!). 【Including 6mm/12mm/16mm Straight bits,12.7mm 90°”V” Grooving bit,12.7mm Dovetail bit,32mm 45°Chamfer bit, 12.7mm Dovetail bit, 32mm 45°Chamfer bit, 12.7mm Flush trim bit,R6.3mm/R9.5mm Round over bit, R6.3mm Core box bit,R6.3mm Core bit,R4mm Roman ogee bit.】 2 Wrenches, 6 Carbon Brushes, 6 Bolts and screws, 1 Manual. A 110V Palm Router with one Router Bit, one Straight Guide and two Guide Plates.
It came today, and even though I knew it was a “cheap” option because I only planned to use it a few times, I took the risk and got shortchanged. This item says it comes with six brushes, but mine had two more. Advertises twelve bits included, but I only got eleven. I will say that the ad says 3000rpm, but the real number is 30,000rpm. Feels good in your hand, but I don’t think it will work very well. If you don’t get everything you want, don’t worry about it. After a lot of use, I might make changes to improve performance.
