While getting a chainsaw wet is fine as we’ve discussed, using a chainsaw in the rain unquestionably comes with its own set of precautions. Despite most users’ understandably natural aversion to getting water on power tools, it’s important to note that chainsaws can get wet. If you’re ready to shop for a new chainsaw armed with this knowledge, check out our favorite small gas-powered chainsaws.
You can use a gas chainsaw in the rain, and even if it’s pouring, it’s not going to damage your chainsaw. The chainsaw’s casing is definitely not water proof, but in any realistic scenario, rain water won’t be able to flow through your chainsaw with enough volume to have a noticeable impact. In a real world situation, safety is the most important thing to consider when deciding whether to keep running a chainsaw in the rain.
Gas-powered chainsaws are the perfect option to use in wet weather conditions as well as on the wet log itself. Sawing through wet wood is okay for your chainsaw bar and blade, although there may be some extra build-up due to wet sawdust. Though a wet chainsaw won’t damage while it’s running, it can cause the tool to rust if not properly cared for.
Ensuring the working conditions are safe for you and others is essential to using the chainsaw under the rain. Another safety concern is the use of protective equipment such as rain boots, gloves, and extra grip for the chainsaw can go a long way. Being careful is highly essential when you are cutting trees or using a chainsaw under the rain.
can chainsaw get wet Related Question:
Can a chainsaw get rained on?
Yes, you can. The pouring rain will not damage your chainsaw, and you can perfectly continue working on your project. Just make sure the engine is not submerged in water. So, if you were thinking about postponing your woodcutting plans due to rain or snow, now you know there is no harm.
Is it OK to leave a chainsaw in the rain?
It is not recommended to leave a chainsaw in the rain. Chainsaws are designed with moving parts that can rust and corrode when they come into contact with moisture. This means that if your chainsaw is exposed to rain, you may need to have it serviced or replaced sooner than expected.
Can you wash a chainsaw with water?
If the guide bar is moderately dirty, you can use just soap and water on a rag to clean it. If it’s heavily soiled, then a degreaser solvent may be required to loosen the buildup of gunk. As for cleaning the chainsaw guide bar groove, you can either use a special groove cleaning tool or a putty knife.
Is it OK to chainsaw wet wood?
No, it is not bad to cut the wet wood with your chainsaw. Dewdrops, raindrops, or the snow on the wood will not cause any harm to your chainsaw. It is, in fact, much easier to cut through the wet wood than dry wood because the extra moisture on the wood will act as a natural lubricant.
Can you use a Stihl chainsaw in the rain?
A chainsaw can be used in the rain, provided it is a gas-powered chainsaw and not an electrically-powered chainsaw. Rain wears out the chainsaw blades much quicker, and falling wet trees can be dangerous because they may fall randomly.
Are Stihl saws waterproof?
They are certified as splashproof and have undergone extensive, varied and very thorough testing and development at STIHL’s Research and Development facilities.
Is it safe to use a chainsaw?
Chainsaws are potentially dangerous machines which can cause fatal or major injuries if not used correctly. It is essential that anyone who uses a chainsaw at work should have received adequate training and be competent in using a chainsaw for the type of work that they are required to do.
How often should you clean a chainsaw?
BEFORE AND AFTER EACH USE: Keep your chainsaw running smoothly by spending an extra minute or two before and after each use to inspect your chainsaw. Clean the chainsaw bar after each use by scraping out any debris inside the track.
How do you sanitize a chainsaw?
Use a brush to remove dirt and wood particles that had lodged themselves in the teeth of the chain and the guide bar. Step 2: Fill a bucket with 9 parts water and 1 part liquid household bleach (or 70% denatured alcohol) until it is three quarters full.
Is it better to chainsaw wet or dry wood?
Wet Wood Vs Dry Wood But wet wood is actually much easier to cut than dry wood. With dry wood lacking moisture content, more friction is created as the chainsaw chain comes into contact with the wood fibers. This friction results in the chain slowing down.
Should I run my chainsaw dry?
Should I run my chainsaw dry? Never run your chainsaw dry, instead use a quality gas stabilizer. A stabilizer will keep fuel fresh and protect a chainsaw fuel system from damage caused by stale gas.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Can you use an electric chainsaw in the rain?
If water gets inside your electric motor, your tool may be at a high risk of malfunctioning or failing to work altogether. Therefore, you should never use an electric chainsaw when wet.
How do most chainsaw accidents happen?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
What to wear while using a chainsaw?
When working with a chainsaw, you should wear a helmet, visor and/or goggles, ear defenders, protective trousers and jacket, chainsaw chaps, safety mitt, gloves, and last but not least, steel-toe boots.