No, it is not bad to cut the wet wood with your chainsaw. The more moisture found on the wood, the less effort required to cut through it because the wet wood does not place any additional resistance on your chainsaw. A diesel, gasoline, or petrol-powered chainsaw is always safe to use in all kinds of weather to cut both wet and dry wood.
Cutting a wet tree with a chainsaw is safe if you’re careful. The biggest problem you may find when chainsawing a wet tree is that the sawdust will stick to the chain. If you’re using an electric chainsaw in damp conditions, be careful in areas of long or wet grass and avoid using extension cables or cords.
The best solution to cut wet wood with a chainsaw is to let the wood dry out. Cutting through wet wood does not accelerate the wear of your chainsaw any more than other types of wood. The best type of chainsaw to cut wet wood is a chainsaw with a gas motor.
can you chainsaw a wet tree Related Question:
Can you use a chainsaw on a wet tree?
No, it is not bad to cut the wet wood with your chainsaw. Dewdrops, raindrops, or the snow on the wood will not cause any harm to your chainsaw. It is, in fact, much easier to cut through the wet wood than dry wood because the extra moisture on the wood will act as a natural lubricant.
Is it bad to use a chainsaw on wet wood?
Does this pose any risk to your chainsaw? In all honesty, no! The additional moisture found on wet wood will not make any difference to the cutting process. It doesn’t place any additional resistance on the chainsaw, and no additional effort is required to cut through it.
Can you cut a tree down when its wet?
Tree removal itself can be a dangerous process. Depending on the tree, this can mean people are scaling great heights to cut down sections of it at a time. A person cannot do that safely in stormy, windy, or rainy conditions. That means the best weather for the tree removal process is a sunny or overcast calm day.
Is it easier to cut a tree wet or dry?
Some, for example, are denser than others, making them more difficult to split. Normally, though, you’ll find that dry, seasoned wood is easier to split than wet wood. Regardless of the tree species from which it was harvested, dry wood contains less moisture, so there’s less resistance when cutting and splitting it.
Can you use a chainsaw in water?
No, you can not run a chainsaw in the water. You can work in the rain and wetlands, but you cannot submerge a regular chainsaw underwater to cut anything under the water surface. If you submerge a gas-powered chainsaw underwater, the water will get into the engine and ruin your chainsaw.
Should I run my chainsaw dry?
Should I run my chainsaw dry? Never run your chainsaw dry, instead use a quality gas stabilizer. A stabilizer will keep fuel fresh and protect a chainsaw fuel system from damage caused by stale gas.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.
Is it easier to cut down a dead tree?
The longer it has been dead, the harder, less flexible, and more brittle the wood becomes. A tree that’s been dead for a while is much more dangerous to cut down than one that has only recently died. And any dead tree is more dangerous to remove than a living one.
Can you cut dry wood with a chainsaw?
When it comes to actually cutting these wooden discs, your mind probably doesn’t immediately jump to a chainsaw as your tool of choice. But a chainsaw actually makes it easy to cut wood slices, especially if the raw material is a log, stump, or other large chunk of wood.
Can you use an electric chainsaw on wet wood?
If water gets inside your electric motor, your tool may be at a high risk of malfunctioning or failing to work altogether. Therefore, you should never use an electric chainsaw when wet.
How long should you wait to split wood after cutting down a tree?
Storing Tips. However the wood is stacked, expect the wood to dry for at least six months before it is ready for the fireplace. Freshly cut wood can have up to 100% moisture, which means around half of its weight is water. The ideal moisture content for firewood is around 20%.
Why does my chainsaw bar smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Is it OK to leave gas in chainsaw?
To store your chainsaw, do not run it out of gas for the winter. This allows the interior seals to dry (and possibly crack) and that is very bad for your saw.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
How long does gas last in a chainsaw?
What is the runtime of a Chainsaw? Depending on the type and usage, you can expect a gas Chainsaw to run between 15 and 40 min before you have to fill it up again. Most battery-powered chainsaws have a run time of up to 2 hours, but there are high-capacity power packs that will last much longer.