If you want to maintain the high performance and quality of your favorite chainsaw, you need to keep the blades in top condition and the best chainsaw sharper is the perfect way to do this. Purchasing a brand new chain every time costs time and money and this soon adds up. Our selection of chainsaw sharpers from Amazon offers options on both sides of the coin, with both manual and electric options that come with exceptional quality to help you maintain your chainsaw without relying on replacement blades.
The best chainsaw raker depth gauge from Tecomec looks very simplistic, almost like a long metal piece. If you aren’t focusing on all possible factors to ensure the best raker gauge tool for your chainsaw chain, you are probably doing it wrong. Take some more time to completely understand everything and find out the best chainsaw raker gauge.
Click to expand…. Those are both ‘progressive’ depth gauge tools. They change the depth gauge offset amount as the cutter wears back. You might prefer a more traditional, fixed offset gauge, like the one in 2manyhounds photo, a few posts above.
best chainsaw depth gauge tool Related Question:
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
What gauge is best for chainsaw?
058″ or . 050″ thickness where it fits into the bar rail. The most popular and readily availble gauge for 3/8″ pitch chain is . 050″ and that is what I recommend because bars and chain loops are readily available and are more competitively priced.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
What happens if you file rakers too low?
If you take your rakers down too low, on the other hand, your chain gets very aggressive and either stalls out in the cut or (worst case scenario), hangs up in the cut and kicks back at you.
What is the purpose of a depth gauge on a chainsaw chain?
A depth gauge is used to provide a flat surface across the teeth of your chainsaw’s teeth to provide a guideline for filing them down to the same height. Step 1: Place a round file on a tooth on the left hand side and, holding it at a 45 degree angle, pull it in a single direction across the tooth.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Does the gauge size matter on a chainsaw?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
How do you sharpen a chainsaw with a depth gauge?
Place a round chainsaw file on a tooth on the left side and pull the file in one direction across the tooth at a 45-degree angle. Pull the file across the tooth five times for general sharpening or up to ten times for very dull blades. Repeat for each tooth on the left side of the chain.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Do you flip the bar on a chainsaw?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
Why does my chainsaw pull to the left?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Why does my chainsaw cut at an angle?
Uneven top plates can cause a chain to cut crooked. It’s important to keep all top plates equal length. Dull cutters damaged by rocks can cause a chain to cut crooked. It’s important to remove all damage from cutters prior to cutting.