The best chainsaw raker depth gauge from Tecomec looks very simplistic, almost like a long metal piece. If you aren’t focusing on all possible factors to ensure the best raker gauge tool for your chainsaw chain, you are probably doing it wrong. Take some more time to completely understand everything and find out the best chainsaw raker gauge.
Click to expand…. Those are both ‘progressive’ depth gauge tools. They change the depth gauge offset amount as the cutter wears back. You might prefer a more traditional, fixed offset gauge, like the one in 2manyhounds photo, a few posts above.
“Before you perform any depth gauge maintenance you need to learn what the setting is. The image above is an Oregon brand cutter tooth. As you can see, the correct depth,.025”, is stamped on the depth gauge. Low depth gauge settings require more power from your saw motor, shorten the life of your chain, cut rougher, increase operator fatigue, and increase the risk of kickback injury. Each file stroke does not take an equal amount of material from the depth gauge.
best chainsaw depth gauge Related Question:
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
What gauge is best for chainsaw?
058″ or . 050″ thickness where it fits into the bar rail. The most popular and readily availble gauge for 3/8″ pitch chain is . 050″ and that is what I recommend because bars and chain loops are readily available and are more competitively priced.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Does the gauge size matter on a chainsaw?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What happens if you file rakers too low?
If you take your rakers down too low, on the other hand, your chain gets very aggressive and either stalls out in the cut or (worst case scenario), hangs up in the cut and kicks back at you.
What is the purpose of a depth gauge on a chainsaw chain?
A depth gauge is used to provide a flat surface across the teeth of your chainsaw’s teeth to provide a guideline for filing them down to the same height. Step 1: Place a round file on a tooth on the left hand side and, holding it at a 45 degree angle, pull it in a single direction across the tooth.
What angle do you file a chainsaw chain?
Always hold the file at a right angle (90°) to the guide bar. The file only sharpens on the forward stroke – lift the file off the cutter on the backstroke.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Do you flip the bar on a chainsaw?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Can you change bar length on chainsaw?
Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
How do I choose a chainsaw blade?
When choosing a chainsaw chain, you first need to know the pitch, the gauge and the number of drive links. Once you have these, everything else about the choice is basically about what you prefer. Pitch is the average distance between two rivets on the saw chain.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
Is my chainsaw chain dull?
When cross cutting (against the grain of the wood) a dull chainsaw chain creates fine sawdust instead of coarse strands. The saw is producing smoke even when your chain is oiled and the chain tension is correct. The chainsaw produces an uneven cut. This could mean that your chain has dull cutting teeth on one side.