The Viking Footwear Class 2 Chainsaw boot is one of our top choices for chainsaw boots. Even though online retailers indicate the sizes of the boots, take a couple of minutes to sieve through the comments and reviews to see how accurate the sizing is. Any rational buyer is usually quick in pointing out a chainsaw boot that falls apart within months of making a purchase.
This is the reason why wearing safety footwear, particularly chainsaw safety boots is essential when using a chainsaw. If it is your first to purchase chainsaw boots – or if you are looking for a replacement for your old one – then take a pick from these best chainsaw safety boots. The reasons why one needs to have chainsaw boots and not just any other pair of shoes are the safety features in these boots.
All personal protective equipment is important to chainsaw safety, but chainsaw boots have one of the most complex jobs in keeping you safe. Secondly, a good chainsaw boot needs to be weather resistant – there’s nothing more uncomfortable than working for hours in wet boots! Many boots have a waterproof lining, with Gore-Tex offering the ultimate level of waterproofing and breathability. Designed for maximum comfort and utility, these boots have a Gore Tex waterproof lining, a rubber sole for good slip resistance in wet environments, a shock absorbing sole and a steel toecap with Class 1 chainsaw protection.
I mean, these Justin Original work boots are perfect for those who are on their feet for up to 12 or more hours a day and also suffer from wide feet. These Wolverine work boots were built following the standards of the so-called contour welt method, which gave these boots the flexibility all protective footwear should have, especially those made for workers who suffer from wide feet. To find the best work boots for wide feet, you should look for that boot that fits comfortably and allows you to get the job done without any hassles, without having to take them off after an hour or so.
Ideally, you should always use a protective visor or helmet with a face screen, chainsaw trousers that have been tested to the appropriate safety class, chainsaw gloves, and of course, chainsaw boots. Professional pick: Rock Fall Chatsworth Class 3 Chainsaw Kevlar Safety Boots with Midsole – must have for heavy duty work and if you need Kevlar. Always check the bar speed though to be sure but it’s hard to pick much in the way of fault with these boots and so they are the new top pick for the best chainsaw boots in the UK! 2. Oregon Yukon Class 1 Leather Chainsaw Protective Boot Probably the best value for money chainsaw safety boots we came across are these Oregon Yukon class 1 leather boots when I compare what’s available elsewhere. Skellerup Euro Forester Chainsaw Safety Boots If you are on a tighter budget but still want outstanding protection, you’d be wise to give these Skellerup Chainsaw safety boots a go. Cofra Power Chainsaw Safety Leather Boots Cofra power chainsaw safety boots are another product worthy of your consideration, offering up excellent quality and great protection an when compared to the first two picks stand up pretty well. Priced at £199 on Amazon, these Chainsaw safety boots from Rock Fall might cost a little more than most people are willing to pay, but if you have deeper pockets and don’t mind shelling out the extra, these are some of the best boots I’ve ever tried.
best chainsaw boots for wide feet Related Question:
What is the difference between Class 1 and Class 2 chainsaw boots?
They provide a higher level of protection than regular boots and Class 1 boots. The Class 2 boots can withstand chainsaw blades running at 24m/s. The metal protection offers a higher level of support compared Class 1 boots, ensuring the higher saw power doesn’t penetrate the boots.
Will composite toe stop a chainsaw?
Re: Chainsaw Boots, Recommendations. Composite protective toe caps offer as much cut protection as a piece of wood. Making a living with a saw since age 16.
Do you need steel toe boots for chainsaw?
The chainsaw protective boot is not required to have a steel or composite toe for a saw operator. However, it’s pretty hard to find a chainsaw cut-resistant material boot without the safety toe. I personally don’t see any reason not to want one.
Are chainsaw boots necessary?
The most important reason why you should use chainsaw boots is overall protection. Both for the chain and falling objects from trees. But they also give a firm grip on the ground when working on different terrains and surfaces.
What is best class for chainsaw protection?
Chainsaw safety classification Class 1 trousers have been tested to provide protection against chainsaws with speeds of 20 m/s. Class 2 have been tested with a chainsaw running at 24 m/s. Class 3 are the hardest wearing and offer protection against chainsaws with speeds up to 28m/s.
What is the difference between Class A and Class C chainsaw trousers?
As mentioned above, the main difference between Type A and Type C PPE trousers is given by the surface the protective layer covers. Because they’re intended for ground workers, Type A chainsaw trousers will only protect the front of the leg, while Type C will protect the entire surface of the leg.
Which is safer steel toe or composite toe?
Steel toe boots offer more protection than composite toe boots since they can withstand higher impact. They are less expensive than composite toe boots. However, steel toe boots are heavier and do not breathe as well as composite toe boots.
Is carbon fiber toe as good as steel toe?
Left and right asymmetrical carbon-fiber toes provide non-metallic, lightweight, and unobtrusive fit. Roughly 30% lighter than steel toes, they’re good for extreme high or low temperatures, and maintain an even ambient temperature throughout the footwear.
Is steel toe stronger than composite toe?
Steel and other Alloy materials are stronger than Composite materials so this allows the Steel Toe (and Alloy Toes) in Steel Toe Shoes to be thinner and have a lower profile (less bulbous) than Composite Toe Safety Shoes and still pass the ASTM Safety Toe tests.
How do you wear chainsaw boots?
Wear Them Around the House One of the most common ways to break in your new safety boots is by wearing them around the house. Do this daily for ten minutes or so at first, and gradually increase the time spent wearing them. You should do this for a while before you wear them for a full day’s work.
How do you take care of a chainsaw boot?
Once the dirt has been removed use a damp cloth (3) to wipe the surface of the boots to remove any residue. If the boots are covered in wet mud hold the boots under slow running water and with a brush remove the dirt and wipe over with a cloth to remove excess moisture. Take care that no water enters the boots.
What safety equipment should be worn when operating a chainsaw?
When working with a chainsaw, you should wear a helmet, visor and/or goggles, ear defenders, protective trousers and jacket, chainsaw chaps, safety mitt, gloves, and last but not least, steel-toe boots.
What are chainsaw boots made of?
It is the support structure that provides rigidity and stability in safety boots. The shank can be made from a variety of materials including steel, plastic, fibreglass and kevlar. They stiffen the outsole to give a more stable fit.
Do you wear anything under chainsaw trousers?
Chainsaw safety boots will need to provide good grip and a protective guarding at the front vamp and instep. They should also be waterproof and breathable for comfort.
Do you wear trousers under chainsaw trousers?
Arborists and tree surgeons opt either to wear just chainsaw protective utility pants or an entire suit of chainsaw protective fabric. The choice is up to the weather and the individual. Higher class trousers are more expensive, hotter, and heavier, and are chosen to match the saw speed.