The Viking Footwear Class 2 Chainsaw boot is one of our top choices for chainsaw boots. Even though online retailers indicate the sizes of the boots, take a couple of minutes to sieve through the comments and reviews to see how accurate the sizing is. Any rational buyer is usually quick in pointing out a chainsaw boot that falls apart within months of making a purchase.
All personal protective equipment is important to chainsaw safety, but chainsaw boots have one of the most complex jobs in keeping you safe. Secondly, a good chainsaw boot needs to be weather resistant – there’s nothing more uncomfortable than working for hours in wet boots! Many boots have a waterproof lining, with Gore-Tex offering the ultimate level of waterproofing and breathability. Designed for maximum comfort and utility, these boots have a Gore Tex waterproof lining, a rubber sole for good slip resistance in wet environments, a shock absorbing sole and a steel toecap with Class 1 chainsaw protection.
The Viking Footwear Class 2 Chainsaw boot is one of our top choices for chainsaw boots. Here is a guide that will help you choose the best chainsaw boot next time you go shopping for one. Chainsaw boots are divided into three principal protection classes according to a particular chainsaw speed’s resistance capacity.
This is the reason why wearing safety footwear, particularly chainsaw safety boots is essential when using a chainsaw. If it is your first to purchase chainsaw boots – or if you are looking for a replacement for your old one – then take a pick from these best chainsaw safety boots. The reasons why one needs to have chainsaw boots and not just any other pair of shoes are the safety features in these boots.
On top of that, the metal holes boast 65kg pulling resistance and the fact that these boots are KWF certified provide enough evidence of their quality and suitability. Professionals like tree surgeons know that if they do not cover the top of their boots, then sawdust may fill up the boots. Designed with a steel toe cap, the boots provide extra chainsaw protection where it’s needed most, towards the top of your foot.
best chainsaw boots 2020 Related Question:
Will composite toe stop a chainsaw?
Re: Chainsaw Boots, Recommendations. Composite protective toe caps offer as much cut protection as a piece of wood. Making a living with a saw since age 16.
What is the difference between Class 1 and Class 2 chainsaw boots?
They provide a higher level of protection than regular boots and Class 1 boots. The Class 2 boots can withstand chainsaw blades running at 24m/s. The metal protection offers a higher level of support compared Class 1 boots, ensuring the higher saw power doesn’t penetrate the boots.
Do you need steel toe boots for chainsaw?
The chainsaw protective boot is not required to have a steel or composite toe for a saw operator. However, it’s pretty hard to find a chainsaw cut-resistant material boot without the safety toe. I personally don’t see any reason not to want one.
Are chainsaw boots necessary?
The most important reason why you should use chainsaw boots is overall protection. Both for the chain and falling objects from trees. But they also give a firm grip on the ground when working on different terrains and surfaces.
Are composite toe boots stronger than steel toes?
Steel toe boots offer more protection than composite toe boots since they can withstand higher impact. They are less expensive than composite toe boots. However, steel toe boots are heavier and do not breathe as well as composite toe boots.
How much heavier are steel toe boots?
On average work boots weigh around 2 to 3 pounds whereas a steel-toe boot weighs up to 4.0 to 4.5 lbs (1.8 kg), and that of an alloy toe is nearly 1.5 pounds lesser. A composite-toe boot weighs up from 1.75 to 4 pounds.
What is best class for chainsaw protection?
Chainsaw safety classification Class 1 trousers have been tested to provide protection against chainsaws with speeds of 20 m/s. Class 2 have been tested with a chainsaw running at 24 m/s. Class 3 are the hardest wearing and offer protection against chainsaws with speeds up to 28m/s.
What does class 2 chainsaw trousers mean?
Class 1 products are tested with a chainsaw speed of 20m/s. Class 2 products at 24m/s and Class 3 at 28m/s.
How do you wear chainsaw boots?
Wear Them Around the House One of the most common ways to break in your new safety boots is by wearing them around the house. Do this daily for ten minutes or so at first, and gradually increase the time spent wearing them. You should do this for a while before you wear them for a full day’s work.
How do you take care of a chainsaw boot?
Once the dirt has been removed use a damp cloth (3) to wipe the surface of the boots to remove any residue. If the boots are covered in wet mud hold the boots under slow running water and with a brush remove the dirt and wipe over with a cloth to remove excess moisture. Take care that no water enters the boots.
What are chainsaw boots made of?
It is the support structure that provides rigidity and stability in safety boots. The shank can be made from a variety of materials including steel, plastic, fibreglass and kevlar. They stiffen the outsole to give a more stable fit.
What safety equipment should be worn when operating a chainsaw?
When working with a chainsaw, you should wear a helmet, visor and/or goggles, ear defenders, protective trousers and jacket, chainsaw chaps, safety mitt, gloves, and last but not least, steel-toe boots.
Are composite toe boots CSA approved?
Fortunately, there’s now an alternative that is still CSA approved but is lighter than steel toed boots – composite. As the name suggests, composite safety footwear is made up of multiple materials that together, give the same safety as steel toed shoes.
Are composite toe boots OSHA approved?
Are Composite Toe Boots OSHA Approved? Composite toe boots meet OSHA and ASTM safety requirements. They are made of non-metallic fibers like Kevlar® and do not conduct electricity.
How do I know if my boot is composite toe?
The bulbous nature of Composite Toe Shoes is necessary to make them test to the same ASTM standard that Steel Toes do. Because composite materials of Composite Toe Shoes are not quite as strong as the steel used in Steel Toes Shoes, Composite Toes have to be thicker and more bulbous.