Starting an Echo chainsaw involves a process that is simplified by the chainsaw’s design. Pull the starter cord until the engine attempts to start. Push the choke control completely in and pull the starter cord to start the engine.
Place your chain saw in a safe starting position, on the ground with no obstructions. Put on your hearing protection, safety gloves and safety glasses and get ready to start the chain saw. Make sure the chain saw warms up for several minutes at idle before starting to cut.
There are two different starting scenarios for Echo chainsaws: starting a cold start and the other being a warm start. If the chainsaw does not start after 5 to 7 pulls on the starter rope use the cold starting procedure. The proper way of starting an echo chainsaw is by placing the chainsaw on the ground and gripping the handlebar with your left hand and applying downward pressure on the handle.
Reduced radius belongs on top Rotational kickback USA : ANSI Standard B175.1 Safety Requirement for chain saws Canada : CSA Standard Z 62.1 CHAIN SAWS WARNING Chain moving downward at impact ANSI Standard B175.1 stipulates that the brake shall stop the chain 0.12 seconds at an engine speed of 13500 r/min. Choke Throttle trigger lockout Throttle trigger Starter handle Unlock chain brake 15 CS-590 WHEN THE ENGINE IS COLD Chain brake CAUTION Make sure the bar and chain are free from any obstruction when starting the chain saw. 0.645 ECHO bar and chain oil 0.300 See page 23 for Chain and Guide Bar Combination Adjustable automatic oil pump 2600 – 3300 3750 – 4250 12000 – 13000 Front hand guard, Rear hand guard, Anti-vibration device, Spiked bumper, Throttle control lockout, Chain brake, Chain catcher, Spark arrestor muffler, Kick guard * Technical data subject to change without notice.
how start echo chainsaw Related Question:
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
What causes a chainsaw not to start?
The chainsaw’s engine is flooded with fuel. A fuel issue is one of the most common reasons why a chainsaw won’t start. If the operator has repeatedly been trying to start the chainsaw through the recoil starter system, they may have accidentally flooded the engine with fuel.
Should I start chainsaw with brake on or off?
Check the Chain Brake When engaged, the chain brake stops the chain from rotating around the saw’s guide bar. When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
What is the easiest starting chainsaw?
The best gas-powered model, the ECHO 18 in. Gas 2-Stroke Cycle Chainsaw, is easy to start and has impressive cutting power.
Is a chainsaw 2-cycle?
Chainsaws and weed eaters use the same type of motor: the two-cycle, or two stroke, engine. Unlike a larger engine on a car, these compact engines use fuel and oil mixed together to power a piston and crankshaft.
Why can’t I start my Stihl chainsaw?
Dirty or clogged fuel tanks, dirty fuel filters and lines, loose fuel hoses, dirty air filters and a dirty carburetor can all restrict fuel flow. Check, clean and replace all the fuel system parts before moving into the internal engine, as gas problems create a majority of starting problems.
What kind of gas does a Echo Chainsaw take?
Your Echo chainsaw is a two-stroke engine that takes a mixture of unleaded gasoline and two-stroke motor oil at a ration of 50 to 1. This mixture equates to one gallon of gasoline to 2.6 ounces of the two-stroke motor oil.
Is Echo a good chainsaw brand?
Echo is a well-known and well-respected brand that has built a reputation for making a range of high-quality and reliable chainsaws. The company produces many models in a range of different sizes, and choosing the right one can be a challenge.