PLACEMENT Place one of the holes in the gauge over one of the depth gauges on the chain. Let the gauge sit against the cutting tooth behind it. HOLD THE GAUGE FIRMLY IN ONE HAND Hold the flat file in your other hand and file the depth gauge until the file comes in contact with the gauge.
A depth gauge is used to provide a flat surface across the teeth of your chainsaw’s teeth to provide a guideline for filing them down to the same height. Step 3: Place the chainsaw depth gauge over 2 of the teeth on the blade. Step 4: Remove the chainsaw depth gauge and place it over the next 2 teeth on the chain.
how to use chainsaw depth gauge Related Question:
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
How do you measure depth accurately?
The depth micrometer is an accurate and reliable tool to use for depth measurement (Figure 1). The depths of holes, slots, shoulders, and projections can be measured accurately to within 0.001 of an inch. When using a depth micrometer, two points must be kept in mind.
How do you know what file to use on a chainsaw?
Simply put, the type of chainsaw file you need directly corresponds with the size of your chain pitch. The larger the pitch will mean the higher the cutting teeth will be. The higher the teeth will therefore mean the larger the file will need to be.
What angle do you file a chainsaw chain?
STIHL saw chains are generally filed to an angle of 30° – parallel to the service mark for the filing angle. Hold the file so that one quarter of its diameter projects above the top plate.
What happens if you file rakers too low?
If the rakers aren’t at the right depth, your saw won’t self-feed and you’ll find yourself pushing down on the saw as you cut. That not only wears you out, but it wears out the bar and chain as well.
How high should the rakers be on a chainsaw chain?
The raker should be about 0.50. 8 mm lower than the cutter. You sharpen the cutters first. Lay the file gauge on the chain.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
What is the measurement shown on the depth gauge?
A depth gauge typical refers to is a precision measurement instrument that is used by mechanical engineers, manufacturing engineers, and machinists among others, to accurately obtain the measurement of the depth of a bored cavity, recess, hole, groove or other similar openings that were created below the surface level
What is the difference between Gage and gauge?
Gage is the spelling of an obsolescent word meaning a pledge, a challenge, etc. Gauge is the spelling to use when you measure measurement, estimate, or standard.
What rule is used to measure the depth of a small diameter hole?
Depth Gages are an adaptation of the rule or Vernier scale for measuring the depth of holes, recesses, etc.
What is an example of depth?
Depth is defined as the distance from top down or front to back, or the intensity of color or sound. An example of depth is a swimming pool being six feet deep.
What size file do you use on a 3/8 chainsaw chain?
With that said, the Stihl 3/8″ chain is identical in size to Oregon and other brands which all recommend a 7/32″ file.
How do I know the size of my chainsaw chain?
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
How is chainsaw pitch measured?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.