If you have problems with your chainsaw coil you can test is with using a multimeter or a multitester. To test the resistance of the coil in your chainsaw which is called a bench test, take your multimeter and remove the coil from your chainsaw to get easy access to its electrical terminals. To conclude this blog post, I would say that after reading the comprehensive and detailed step by step guide given above, you can easily perform a test of the chainsaw coil using a multimeter.
A chainsaw coil is one of the most important parts of your chainsaw. A bad or broken coil can lead to a faulty saw that doesn’t work, so it’s important for you to know how to test your chainsaw coils yourself. You have been able to complete the chainsaw coil test with the help of a multimeter.
The normal primary resistance range of the coil of a chainsaw is 0.4 to 2 ohms, yet you should search for the exact primary readings of your chainsaw indicated in your user manual. The normal secondary resistance range of the coil of a chainsaw is somewhere close to 6,000 and 10,000 ohms you should search for the exact secondary readings of your chainsaw indicated in your user manual. To test the resistance of the coil in your chainsaw which is known as a bench test, take your multimeter and remove the coil from your chainsaw to get simple access to its electrical terminals.
An ignition coil gets used to transfer voltage signals to the spark plug to ignite the fuel and air mixture in the chainsaw. You can test the circuit by attaching the positive end of the coil to the multimeter and attaching it to the high output terminal traveling to the spark plug. All the steps mentioned above will help you test the chainsaw ignition with a multimeter and maintain your chainsaw over time.
how to test chainsaw coil Related Question:
How do I know if my chainsaw coil is bad?
If your multimeter displays a reading of zero, it is an indication that you must replace the coil of your chainsaw at once because it has short-circuited. If your multimeter displays a reading above the specified level it is an indication that you will also have to replace the coil of your chainsaw because it is open.
How many ohms should a chainsaw coil have?
As well as this, also attach it to the terminal that connects to the chainsaw’s spark plug. A coil’s secondary resistance range (on average) is from 6 thousand to 10 thousand ohms. However, you need to make use of your manual to confirm the right secondary readings of the chainsaw you own.
Can you test ignition coils?
The only safe way to test for spark is to use a spark plug tester tool. If a coil problem is suspected, measure the coil’s primary and secondary resistance with an ohmmeter. If either is out of specifications, the coil needs to be replaced.
How many ohms should an ignition coil have?
A typical value would read 0.4 – 2 ohms.
How do you test a coil on a Kohler multimeter?
Using one of the multimeter’s probes, contact the metal terminal of the coil and open the center opening. On the other probe, hold it between the ignition coil’s grounding terminal and the electrical terminal of the meter. Test reads 600 to 13,000 ohms on the meter. A coil’s secondary winding can fail if it does not.
How do you test a 12 volt ignition coil?
Insert one of the multimeter’s probes into the center opening of the coil, contacting the metal terminal inside the coil. Touch the second probe of the meter to the ignition coil’s grounding terminal. The meter should read 6,000 to 15,000 ohms. If it does not, the coil’s secondary winding is faulty.
What would cause no spark from coil?
Loss of spark is caused by anything that prevents coil voltage from jumping the electrode gap at the end of the spark plug. This includes worn, fouled or damaged spark plugs, bad plug wires or a cracked distributor cap.