Oregon says 4.5 mm they say a 5/32 is compatible.
For best results use a 4.5 mm file and a file holder or filing guide to sharpen your chain. Figure W- Keep the correct top plate 19 filing angle line of 30° on your file guide parallel with your chain. You can use oregon off the shelf bar and chain or dewalt branded ones.
what size file for dewalt chainsaw Related Question:
What size file do I need to sharpen a Dewalt chainsaw?
For best results use a 4.5 mm file and a file holder or filing guide to sharpen your chain. This will ensure you always get the correct sharpening angles.
How do I know what size file I need for my chainsaw?
Simply put, the type of chainsaw file you need directly corresponds with the size of your chain pitch. The larger the pitch will mean the higher the cutting teeth will be. The higher the teeth will therefore mean the larger the file will need to be.
What size chain does a Dewalt chainsaw use?
Our durable 16 in. Replacement Saw Chain is designed to fit 16 in. bars on the DEWALT® 60V MAX* Cordless Chainsaw (DCCS670). This low-vibration chain is designed to cut smooth and fast with minimum kickback.
What size file do you use on a 3/8 chainsaw chain?
With that said, the Stihl 3/8″ chain is identical in size to Oregon and other brands which all recommend a 7/32″ file.
How many different size chainsaw files are there?
Chainsaw File Size As we will see on the graph, the primary file options are 4.0 mm, 4.8 mm, and 5.5 mm. It comes in either a round file or flat file depending on the type of cutter you are planning to sharpen.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
What kind of file do you use to sharpen a chainsaw?
While some professional loggers use square files like the ones to sharpen knives, almost all other chainsaw owners use round files for sharpening. There are three common sizes of chainsaw files: 5/32, 3/16 and 7/32.
Will a Oregon bar fit a Dewalt chainsaw?
Oregon R56 Chainsaw Chain for 16 in. Bar Fits Dewalt, Echo, Makita, Milwaukee, Craftsmand and more R56.
What is the difference between R56 and S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
Why does my chainsaw blade go dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
How do I know what pitch my chainsaw chain is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What is a 3/8 pitch chain?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
What is the correct file size for .325 Stihl chain?
325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
What is the best angle to sharpen a chainsaw chain?
Always file at right angles to the guide rail. The right sharpening angle depends on the saw chain and the wood that you want to cut. The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle.
What happens if you file rakers too low?
If the rakers aren’t at the right depth, your saw won’t self-feed and you’ll find yourself pushing down on the saw as you cut. That not only wears you out, but it wears out the bar and chain as well.