Read on for an in-depth look at how dirt dulls a chainsaw chain, plus some handy tips on keeping dirt out of your chain. It dulls your cutters, wears out your chain links, and stretches your chain. Unless you’re a professional who’s been using a chainsaw for years, getting dirt in your chain is inevitable.
Dirt is an abrasive containing many elements, as mentioned by basswidow, harder than a chain or planer blade. I would think it would dull a planer blade fairly quickly, but maybe not as fast as a chain because the planer blade is a different, much harder alloy. I would think dirt from different areas would dull at different rates, depending on the mineral content of the soil in a given area.
In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain.
Your chainsaw blade gets dull so fast because your chain is hitting the ground, the tree is filled with dirt, and/or the bar is bent. A dull chainsaw blade will lead to wear of different components of the saw, including the clutch and engine since they would have to work harder because of the blade’s dullness. If you are cutting firewood that has been left on the ground, you would need to sharpen your chainsaw more often as the accumulated dirt would dull your blade faster.
how does dirt dull chainsaw blade Related Question:
How does dirt dull a chainsaw blade?
Don’t Cut Into Dirt All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. Plus, dirt wears the sprocket at the bar tip.
Will dirt mess up a chainsaw?
Dirt contains various hard particles that are harder than the chain’s steel. As a result, it can dull the sharp chain cutters and affect its performance.
Why does my chainsaw blunt so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Why does my chainsaw blade get dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
Does charred wood dull a chainsaw?
Re: Cutting burnt wood From my limited experience, it dulls chain fast. If you have a lot to do, then Bailey’s sells chain to cut in dirty conditions.
Does dirt dull a AXE?
Don’t put your axe away dirty or wet, dirt and moisture accelerate corrosion. Use an oil to protect your axe head.
Why does my chainsaw cut curves?
Two main reasons will cause the chain to cut on a curve. The most common reason is from improper hand filing. If one side of the teeth is more heavily damaged, sharpening them down will make them smaller than the other side.
Does hard wood dull a chainsaw?
Re: Chainsaw and oak Very hard but really puts out the heat in the fireplace. If you cut it green it is not too bad. After it has dried it will dull a chain about each tank of gas. And that was Stihl chain.
How many times can I sharpen a chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
How long should a chainsaw blade stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Is tung oil good for tool handles?
The best oil to use for treating axe handles is pure Tung Oil. Proper application will fully saturate the wood to provide complete waterproof protection for your axe handle. It also outlasts Boiled Linseed Oil, ages better and the finish is harder but still maintains flexibility.
Is Ash good for axe handles?
For this reason, ash is a popular wood choice for axe handles. Ash has long fibers that allow the wood to absorb shock easily, minimizing user fatigue. Additionally, Ash is strong and flexible. The strength will allow the handle to withstand years of use.
Is it worth sharpening a chainsaw?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
What’s the best angle to sharpen a chainsaw chain?
Always file at right angles to the guide rail. The right sharpening angle depends on the saw chain and the wood that you want to cut. The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle.