Make the following small adjustments: A. Undo the bar fastening wheel by 1/2 of a turn COUNTERCLOCKWISE. Then slacken the chain tension by slowly turning the chain tensioning wheel IN A COUNTER-CLOCKWISE DIRECTION and then pull the chain back and forth on the bar. If the saw chain is TOO LOOSE or TOO TAUT, the drive wheel, chain bar, chain and crank shaft bearing will suffer premature wear. Lubrication of chain and chain bar Whenever you refill the fuel tank with petrol you must also top up the level of chain oil in the chain oil tank.
how to start einhell chainsaw Related Question:
How do you start a Einhell chainsaw?
Hold saw firmly and pull starter rapidly 4 times. Engine should start. 7. Let the engine run for 10 seconds to warm up.
Where are Einhell chainsaws made?
Einhell Germany AG is a German manufacturer of power tools and electrical garden equipment in Landau an der Isar, Germany.
Is a chainsaw 2-cycle?
Chainsaws and weed eaters use the same type of motor: the two-cycle, or two stroke, engine. Unlike a larger engine on a car, these compact engines use fuel and oil mixed together to power a piston and crankshaft.
Why can’t I start my Stihl chainsaw?
Dirty or clogged fuel tanks, dirty fuel filters and lines, loose fuel hoses, dirty air filters and a dirty carburetor can all restrict fuel flow. Check, clean and replace all the fuel system parts before moving into the internal engine, as gas problems create a majority of starting problems.
Why does my Stihl chainsaw not start?
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and prevent the engine from starting.
What does the choke do on a chainsaw?
The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.
Are Ozito and Einhell the same?
The Power X Change battery platform is shared by cordless tools from Ozito and Einhell, meaning all Power X Change batteries, chargers and tools are freely interchangeable between the two brands.
What batteries are compatible with Einhell?
A small example: Einhell’s 4-6 Multi-Ah battery can be used both as a 4 Ah battery and as a 6.0 Ah battery. As a 4 Ah battery, the cells are not fully charged or discharged.
How do you start a cold Stihl chainsaw?
Step 5 of 15: Setting the master control lever to Choke / Cold start. First press the throttle trigger lockout and the throttle trigger. Then press the master control lever all the way down. Step 6 of 15: To start the chain saw, lay it on a flat surface.
Why is my chainsaw flooding?
There could be various causes: incorrect fuel mixture, carburation not calibrated properly, or a wet spark plug. In spite of their power and robustness, chainsaws are actually rather delicate machines that require careful and precise maintenance at every stage of their life cycle.
How long does it take to Unflood a chainsaw?
The first option is the easiest since it doesn’t require any effort on your part, it just takes time. Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.