When your electric chainsaw stops working, chances are good that if you want to save time and money the best thing you can repair electric chainsaw by yourself. The chain not being properly lubricated will eventually cause the chain as well as the chain bar to be damaged. A dull chain can cause it to kickback to you or jump, which might cause it to knock chain pieces off that could cause you serious injury.
Electric Chainsaw Repair: Dos and Don’ts DON’T use a damaged chainsaw. DON’T expect electric chainsaw repair to be easy. The ideal approach to maintain a strategic distance from jumping into the complicated task of an electric chainsaw fix is to ensure that your chainsaw is, in every case, clean and all around oiled.
how to repair electric chainsaw Related Question:
Why did my electric chainsaw stop working?
Tripped electrical breaker (for corded chainsaws) Frayed or damaged electrical cord (for corded chainsaws) Bad or undercharged battery (for cordless chainsaws)
How do you troubleshoot an electric chainsaw?
Charge the chainsaw if it is not turning on. If it has a battery, the battery may be faulty and require replacement. If it won’t start even when the saw is plugged into a power source, the battery is not the likely culprit. Replace the fuse in the chainsaw if it is still not starting and the battery appears healthy.
Do electric chainsaws overheat?
Electric chainsaws tend to overheat when used extensively, or when they are not assembled properly. This could be due to a loose part that missed while assembling the saw or a lack of lubrication that creates heat due to friction between parts.
Why does the chainsaw cut crooked?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Why is my chainsaw not cutting well?
The most common cause of a chainsaw that won’t cut properly is a dull cutting chain. Try sharpening or replacing the chain. The chain may not have the proper amount of tension. If the adjustment screw is too loose, the chain may not make good contact with the wood.
How much does it cost to repair a chainsaw?
THE AVERAGE CHAINSAW SERVICE IS $100 TO $125 If we can find ways to help save you money, we will suggest them to you. If we do not feel it is worth repairing, we will tell you so.
Why is my electric chainsaw smoking?
The electric chainsaw smokes from the lubricating oil. Do not hesitate to remove the oil from your tank by trying another oil with increased lubricity. If the problem is with the oil, the electric chainsaw gives off a blue smoke, very characteristic of an oil problem.
What is a chainsaw sprocket?
What is the drive sprocket? The drive sprocket and the clutch drum are connected to the saw motor. The sprocket is designed to drive the proper-pitched chain around the guide bar.
Why does my electric chainsaw leak oil?
Even after you have removed oil from the reservoir, the electric chain saw might continue to leak oil if the pump is dirty. Excessive oil on the oil pump gaskets can cause leakage. Wipe the gaskets clean and check them for wear. If the gaskets are ruptured, replace them.
Why did my chainsaw blade stop spinning?
If the chain is too tight, the blade may not spin when the throttle is engaged, which can cause damage to the clutch or other associated parts. Keep in mind that the tension of the chain will change with heat. As the chainsaw is used and the chain heats up, it will become loose.
How do you know if your chainsaw clutch is bad?
Does the engine loose revs, or the engine keep revving and just the chain stops? If the engine is still running at normal revs, and the chain slows down, then it’s a problem with the clutch. Worn out, gummed up, jammed springs etc. If the engine looses revs under load then it’s more likely a fuel or carb problem.
Can I use wd40 on my chainsaw?
We recommend using WD-40® Specialist® Fast Acting Degreaser and soak it for 10 to 15 minutes. Next, use a wire brush to remove all the grime (repeat several times) and wipe with a paper towel to make sure all the dirt is gone.
Do electric chainsaws have a spark arrestor?
Clean the Spark Arrestor: Your electric chainsaw has a kind of screen that protects you from the sparks that are generated inside your machine. The spark arrestor blocks the sparks from coming out. In this way, it protects you from damage and also lets you work without a problem.
Can an electric chainsaw cut down a tree?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.