I have a similar one and it works Ok. The flex is not an issue as just the lightest touch on the chainsaw tooth is required. As with most such tools it tends to use up chain quicker than sharpening by hand, and probably is no quicker to use compared to a skilled arborist who sharpens chains regularly.
Please note that this offer might only be available regionally. The detailed informations are available on the homepage of Aldi.
how to use ferrex chainsaw sharpener Related Question:
What degree do I set my chainsaw sharpener?
Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it’s best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain. They do make ripping chain that comes sharpened at 10 degrees for cutting with the grain of a log.
Is ferrex the same as workzone?
There’s also no grantee that the drill they’re selling next week is the same one they sold last year, because Workzone and Ferrex are what’s know as private (or phantom) brands.
What angle do you sharpen a chainsaw with an electric sharpener?
You will need to place the blade in the chainsaw sharpener’s holder and then adjust the angle. What is this? Typically, the most common angles are usually between 0 degrees and 60 degrees. In some special cases, however, the angle could go to 80 degrees.
How often does a chainsaw need sharpening?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
What is the down angle on a chainsaw chain?
According to the chain’s manufacturer, the chain should be sharpened with a 10 degree down angle, but with a note that when sharpening with a hand file to use a 0 degree down angle.
Who makes ferrex products?
While Ferrex is a registered trademark of ALDI, there isn’t any clear information on who produces Ferex tools. hotukdeals users Daz_EOd stated that Ferrex tools are produced by Chinese company Positec, who also produce the Worx brand of power tools.
Is Gardenline an Aldi brand?
The best of Aldi’s Gardenline range: Available to pre-order now with a dispatch date of 8 August, transform your garden with this brand new 3-piece rattan weave bistro set from Aldi featuring a pretty petal design.
Will WorkZone batteries fit ferrex tools?
The FERREX 18 V battery is a lightweight battery that allows for comfortable work due to its small and compact size. The spare battery is compatible with the WORKZONE TITANIUM+ series cordless hammer drills, impact drivers and cordless circular saws and easily replaceable.
Is ferrex a German company?
ferrex GmbH, Bremen, Germany.
What batteries are compatible with ferrex tools?
Choose your battery power 20/40V Battery is suitable for all Ferrex 20V and 40V Power Tools. The 20V Battery is also available but these are only compatible with 20V Ferrex Power Tools.
Why does my chainsaw blade go dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
What angle should I sharpen my STIHL chainsaw chain?
STIHL saw chains are generally filed to an angle of 30° – parallel to the service mark for the filing angle. Hold the file so that one quarter of its diameter projects above the top plate.