This two-in-one sanding machine has both a 1-by-30-inch belt and a 5-inch disc.
Product 1: The 2.3A motor can run the belt at 3160 FPM and the disc at 3450 RPM.
Product 1: It has a sturdy, heavy-duty base that doesn’t move or wobble when it’s in use.
Product 1: Has two separate dust ports for the best vacuuming efficiency.
Powerful 1/2 HP 3.5 amp motor: 58 OPM and 2000 RPM.
Product 2: Has onboard storage for all of your tools, as well as a port for a dust extractor.
Product 2: Connect the dust collector of your choice to the onboard dust port to make clean-up as easy as possible.
At 1 inch by 30 inches, the WEN 6515T 1 inch belt sander has an extra-large 5 inch disc.
Remember when you needed a sander that could do a lot of different things. You can use the WEN 1 x 30-Inch Belt Sander with a 5-Inch Sanding Disc to get rid of splinters and jagged edges on your wood and lumber. Users should expect speeds of up to 3160 feet per minute on the belt and 3450 RPM on the disc with a 2.3-amp motor. Making changes to a belt that is 1 inch by 30 inches makes it easy to switch sand paper grades quickly and easily. This gives you the power to switch sand paper grits quickly and easily. The small size makes it easier than ever to move and store, and the heavy-duty base makes sure the machine doesn’t move or wobble while it’s in use. With all of this and the 5-inch side disc, you’ll be able to sand anything you want. A strong beveling work table comes with both the disc and the belt to keep your workpieces steady. Sanding discs and belts are also included in this package. There is also a miter gauge for angled workpieces, two separate dust ports, and a miter saw for cutting straight lines. Wen’s products come with a two-year warranty, service technicians across the country, and a customer phone line that can help. In this tool, the WEN 1 x 30-Inch Belt Sander has a 5-Inch Sanding Disc that can be used to sand all kinds of hard-to-reach places. Remember when you could sand everything. Remember WEN, please.
In this case, the WEN 6510T 3.5 Amp Oscillating Spindle Sander, Black, has a 3.5 Amp motor.
It’s been a long time since you had to sand those round edges by hand. As long as you use the WEN oscillating spindle sander, you’ll never have to deal with that again. You can quickly and easily smooth out arcs, curves, contours, and other weird shapes with this tool. The plates and drums are easy to put in and out, and the lightweight design makes it easy to move around if you need to. However, just because the design is small and only weighs 30 pounds doesn’t mean that we’ve lost power. This sander from WEN has a quiet and smooth 1/2HP 3.5 amp motor. The sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8-inch stroke every minute. Sanding sleeves come in six sizes: 1/2, 3/4, 1, 1-1/2, 2 and 3 inches. We also include five rubber drums that can be used to make a wide range of curves. On the other hand, the onboard storage keeps the spindles, sleeves, Table inserts, and Spindle washers in order and easy to reach for quick changes. The dust port gives you the chance to attach a dust extractor to get rid of the dust that is in the air. This will keep your working surface and shop clean so you can keep building. Because it’s made by WEN. A customer service hotline that is both friendly and knowledgeable, and a network of skilled service technicians across the country. It’s time to make even the most difficult sanding job easy, so you can be as creative as possible with any woodworking project. It’s hard to remember when you could sand any shape or edge you wanted to make. Remember WEN, please.
It is very cute. The belt section is easy to get to so you can change belts and track the belts to the center. Behind the belt, there is a piece of metal. This makes it very easy to sharpen chisels and scissors, as well as knives and other hand tools. In my use, I have not seen the motor bog down at all. For nearly three hours, I used this right out of the box. I didn’t have any motor problems at all. Keep the deck on the belt tight, and it often falls if I put any tool on it. Because I didn’t want to use the deck anymore, I just sharpened my tools on the ground. A lot of the discs are garbage. The pad is stuck to the machine, so I had to use a heat gun to get the pad off, then clean the residue with mineral spirits. When I added a section for discs, I added a hook and loop pad. I just bought hook and loop disc paper for it. People are happy with the way things worked out. For the belt, the deck for the disc is better than the belt deck for the disc. The belt deck is still pretty flimsy. They don’t have the right angles on the decks. The base is strong, and I haven’t had any problems walking, wobbling, or staying on my feet so far because of it. During the past three weeks, I’ve used this machine about 20 hours. I’ve already bought another one for my brother for Christmas.
