STIHL Pro Tip Providing you observed these rules you will achieve perfect sharpening results, the correct side plate and top plate angles will be obtained automatically and best possible cutting performance guaranteed. The filing gauge for the next chain pitch up may be used for this purpose. Count the number of file strokes and use the same number on each cutter to obtain cutters of identical length.
Sharpen using steady, even strokes to remove the damage while counting the number of file strokes. File all of the cutters with the same number of strokes per cutter from the inside to the outside so that the cutter lengths are equal. Complete all the cutters on one side of the chain, before turning your chain to switch sides.
how to file a chainsaw guide Related Question:
What angle do you sharpen a 3/8 chainsaw chain?
What degree do you sharpen a 3/8 chainsaw chain? If you don’t know, or cannot figure out which chain you have, you can use the ‘default’ angles that most shops will use when sharpening chains that customers bring in: 30° / 60° / 0°, with a 0.025″ depth gauge offset.
What happens if you file rakers too low?
If the rakers aren’t at the right depth, your saw won’t self-feed and you’ll find yourself pushing down on the saw as you cut. That not only wears you out, but it wears out the bar and chain as well.
What is the best angle for chainsaw?
The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle. To maintain the correct angle, we recommend that you use a sharpening grid or a filing gauge as an aid.
How high should the rakers be on a chainsaw chain?
The raker should be about 0.50. 8 mm lower than the cutter. You sharpen the cutters first. Lay the file gauge on the chain.
What is the purpose of rakers on chainsaw?
Depth gauges, “riders,” or “rakers,” as they are sometimes called, control the amount of wood severed by a cutter tooth. During the life of a pro saw chain, they occasionally need maintenance for top cutting performance.
What is a 3/8 pitch chain?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
How many different size chainsaw files are there?
Chainsaw File Size As we will see on the graph, the primary file options are 4.0 mm, 4.8 mm, and 5.5 mm. It comes in either a round file or flat file depending on the type of cutter you are planning to sharpen.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How long should a chainsaw blade stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Why does my chainsaw cut sideways?
Uneven top plates can cause a chain to cut crooked. It’s important to keep all top plates equal length. Dull cutters damaged by rocks can cause a chain to cut crooked. It’s important to remove all damage from cutters prior to cutting.
How do I make my chainsaw chain more aggressive?
In general, if you want to have an aggressive cut, you are going to need a chainsaw chain that operates as quickly as possible. A chainsaw chain with full chisel teeth means that you are cutting with a very high speed. Speed being one of the main ingredients behind an aggressive chain, this is clearly vital.