Tightening the screw will tighten the chain, and loosening will loosen the chain. Visit our Chainsaw Chains page to our inventory of available replacement chains and other chainsaw accessories. eReplacementParts.com stocks thousands of parts for many major chainsaw brands, including Echo chainsaw parts.
Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw by turning it clockwise using the combination spanner. A damaged bar or chain may cause the chain to come loose from the bar and can be very dangerous when operating the machine. Re: using a stihl chainsaw chain on a husqvarna saw.
Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw by turning it clockwise using the combination spanner. When the chain tension is correct, fully tighten the bar nut with the spanner while lifting the end of the bar. Before buying a chain, you need to know the pitch, gauge and dl count that your bar takes – the brand of the chain isn’t a factor by itself, regarding fit-up.
how to tighten husqvarna chainsaw Related Question:
Why does my Husqvarna chainsaw chain keep coming loose?
Chain Not Set Properly One of the most common reasons why your chain might be coming loose is because it was not set properly. When you go through the steps to tension your chain, you need to finish those steps by setting the tension so it won’t change as you work your saw.
Why does my chainsaw keep throwing the chain?
The drive sprocket is the mechanism that propels the saw blades on the chain around the bar. If the sprocket gets significantly worn down, it will be impossible to maintain proper chain tension, which will result in your chain saw throwing its chain.
Why does my chain keep getting loose?
Your chain might simply be too old or can stretch over time. When this occurs you need to replace it. Consider that your loose chain also may be due to operator error. Exceeding the recommended gear range for the rear derailleur on your bike may lead to a droopy chain when you ride in these gears.
What is tool less chain tensioning?
The tool-less chain tensioner allows you to easily adjust the tension of the chain, without using tools!
Where is the tension screw on a chainsaw?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
Is a chainsaw chain supposed to be loose?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
What happen when the chain of cycle become loose?
The major symptoms of a loose chain include chain teeth skipping over the sprockets, uneven transmission of power to the wheel leading to jerky wheel movements, chain lash and the chain slapping the swindle arm, and in the final case, chain coming off the sprocket.