Grounded Tools: Tools with 3-Prong Plugs Tools marked with Grounding Required have a 3-wire cord and 3-prong grounding plug. Double Insulated Tools: Tools with Two-Prong Plugs Tools marked Double Insulated do not require grounding. Before Each Use ⚠WARNING To prevent serious injury from accidental operation: Turn the power switch of the tool off and unplug the tool from its electrical outlet before performing any procedure.
Here are the best chainsaw sharpeners to add to your workshop. Electric sharpeners are easier and quicker to use than manual chainsaw sharpeners, but they are also a bigger investment that might nor might not be worth it for you. Versatility Before you purchase a sharpener, make sure it can be used for your chainsaw brand and your chain gauges, as not all sharpeners work for any given model.
how to use ironton chainsaw sharpener Related Question:
What angle do I set my chainsaw sharpener?
Always hold the file at a right angle (90°) to the guide bar. The file only sharpens on the forward stroke – lift the file off the cutter on the backstroke. Rotate the file a little at regular intervals while filing to avoid one-sided wear.
How often does a chainsaw need sharpening?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Why do chainsaws cut on an angle?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Why does my chainsaw blade go dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Should I sharpen my chainsaw chain or buy a new one?
Sharpen before replacing In general maintenance of a chainsaw is important because it can help prolong the lifespan of the different parts of your machine, as well as the machine itself. If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had.
Why does my chainsaw jump when cutting?
Improper Chain Tension You can extend the life of your chain, bar and chain saw motor by maintaining the proper amount of tension on the chain. Too much slack in your chain can cause the saw blades to jump the bar. This is commonly referred to as throwing the chain.
Why does my chainsaw burn the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
What size file does a STIHL ms170 use?
STIHL chains and the file size is 5/32 in.
What is a Picco chain?
STIHL PICCO™ Micro™ 3 chain is a low-kickback, narrow kerf, smooth-cutting and low-profile chain ideal for small to mid-sized chainsaws with between 1.5 kW (2.0 bhp) and 1.9 kW (2.5 bhp). It performs equally well as compared to the PMM3 chain, with the only difference being a slight increase in weight.
Do you flip the bar on a chainsaw?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
How often should I change my chainsaw chain?
The chain sprocket must be replaced if the depth of the wear marks reaches about 0.5mm, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on.
Why does my chainsaw bar smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.