If the chain has a master link, simply remove it and the necessary amount of other links to make the chain the correct length. Chainsaw chains can be shortened; however, the difficulty of doing so is different depending on whether your chain has a master link. If you’re shortening your chain because it has stretched due to wear and use over time, the chain should not be shortened.
how to link chainsaw chain Related Question:
Do chainsaw chains have a master link?
Locate the master link that most manufacturers install to make removal of the chain a simple process. A visual inspection of the chain will reveal the master link due to its appearance that makes it stand out slightly from the other links.
Can you fix a broken chainsaw chain?
If you have decided to repair the chain, at this point you can do so. You can sharpen the chain with a chain sharpener, remove additional chains using the rivet punch or screwdriver if the chain has stretched, adjust the links in the chain, or replace damaged links in the chainsaw chain.
How many drive links on a 14 inch chainsaw chain?
Oregon S52 AdvanceCut Chainsaw Chain for 14-Inch Bar -52 Drive Links – low-kickback chain fits Dolmar, Ryobi, Echo and more. This product is only available through retailers or servicing dealers. Designed to fit all chainsaw brands, with models that require a 3/8 Inch pitch, .
What is a chainsaw chain drive link?
Gauge Measurement The parts of chainsaw chains that fit into the saw’s guide bar are called the drive links. The drive link is the bottom part of the chainsaw chain (see picture below). Gauge measures the thickness of the drive links if you were to look at them along the length of the chain.
Why do chainsaw chains get loose?
What is this? This one is basic science – when metal gets warm, it expands. As you use your saw, it is naturally going to heat up and get larger. Therefore, a chainsaw chain can start off tight and then loosen up.
Do chainsaw chains stretch over time?
It’s perfectly normal for a chainsaw chain to stretch after regular use. But, if you allow your chainsaw to become too loose, it can easily come off and pose a dangerous situation for you. A chainsaw chain stretches and loosens from tension and extreme friction.
Why does my chainsaw chain keep stretching?
Another cause of stretching is called “wearing off.” This is the process that causes the chainsaw chain to loosen because it gets worn down over time. If you have been using a chain for a long time, you might notice that it gets loose more frequently.
Can you replace a link in a chainsaw chain?
Before using a chain saw, it’s imperative that you give the machine a thorough examination each and every time to look for broken, missing or malfunctioning parts. When you notice that one of the links of the chain saw is damaged, avoid using the machine until you can replace the link with a new one.
How do I know if my chainsaw chain is worn out?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Does the number of drive links matter?
For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile. Shorter chains can cut branches under two inches much faster than long ones because the short length of the blade doesn’t get caught up in them as much.
Does it matter how many drive links are on a chainsaw chain?
Number of links is to fit the bar – pitch is to fit the sprocket. Show activity on this post. Since the number of links is larger(81 instead of 74), there is low chance that it would fit properly.
How many drive links in a 18 inch chainsaw?
0.050 Gauge 0.325 in. Pitch Chainsaw Chain, 72 Drive Links. This product is only available through retailers or servicing dealers.
What do numbers on a chainsaw chain mean?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The first number represents the pitch: 1 = 1/4″ 2 = 0.325″
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.