how to start stihl chainsaw ms170 Related Question:
Is there a trick to starting a Stihl chainsaw?
Press and hold the throttle trigger lockout (located on the side of the chainsaw, above the trigger) with your thumb, then move the master control (on the left of the rear of the chainsaw) down as far as it will go. This is the position you should start the chainsaw in the first time you use it each session.
Do you start a chainsaw with the brake on?
When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
What’s the difference between Stihl 170 and 171?
The MS 170 has a displacement of 1.80 cu. in., fuel capacity of 8.5 oz., chain oil capacity of 4.9 oz., and powerhead weight of 8.6 lbs. The MS 171 has a displacement of 1.94 cu. in., fuel capacity of 9.5 oz., chain oil capacity of 6.1 oz., and powerhead weight of 9.5 lbs.
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
Can you put an 18 inch bar on a Stihl ms170?
Homeowner Chain Saws Stihl recommends that its MS 170, MS 171, MS 180, MS 181, MS 192 and MS 211 homeowner models be equipped with guide bars between 12 and 16 inches. The MS 250 and MS 251 models are equipped with larger 45 cc engines and are capable of driving an 18-inch bar.