XTo sharpen a dull chainsaw, clamp the bar of the chainsaw to your work station and tighten the chain using the tension adjusting screw to make sure it won’t move. Use a permanent marker to draw a line on the link where you’re going to start filing, and get a specialty chainsaw file that’s the same diameter as the chainsaw teeth. To file, hold the file between the teeth at a 30 degree angle, and slide it across the face of the cutter 3-10 times until it is sharp.
File Sharpening Using a file to hand sharpen a dull saw chain might seem like a very slow way to go. Bench-Top Sharpeners If you use a chainsaw all year-round or if you own more than one chainsaw, then you can save a significant amount of time and energy by sharpening the saw chains with a bench-mounted sharpener. A bench-top sharpener is certainly the quickest, most accurate way to sharpen a saw chain, but just as importantly it makes it nearly impossible to ruin a saw chain by grinding away too much material.
Since saw chains have cutters that alternate orientation along the chain, you need to use a chainsaw sharpener on all cutters on one side, then swivel the chain holder and tackle those pointing the other way. An electric chainsaw sharpener is ideal for this kind of periodic chain maintenance, though you will need to change the abrasive wheel to an extra-wide version made for this work. No matter how you use a chainsaw sharpener, it makes sense to keep an extra chain or two on hand, sharp and ready to go as you’re working in the forest.
Of course, STIHL Approved Dealers will always be happy to sharpen a chainsaw chain for you and if the chain is damaged at all, then replacing the chain or the damaged cutting teeth, is the best course of action, so again, just pop into your nearest STIHL Approved Dealer. It’s really important to make sure the depth gauge is filed too, as it is the difference between the height of the cutting teeth and the depth gauge which determines how much wood is taken out by the chain. If you are working with a battery or electric chainsaw, make sure you remove the battery or unplug it before sharpening so it can’t be accidentally started, then release the chain brake so you can move the chain freely.
how to sharpen my chainsaw Related Question:
Is it worth it to sharpen a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How often does a chainsaw need sharpening?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
What’s the best angle to sharpen a chainsaw chain?
Always file at right angles to the guide rail. The right sharpening angle depends on the saw chain and the wood that you want to cut. The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle.
How much does it cost to sharpen chainsaw chain?
HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters.
Why does my chainsaw blade get dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
Is it better to sharpen chainsaw chain or buy new?
Sharpen before replacing If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had. This is why, where possible, you should be looking to keep the will be chain sharp, as sharpening a better course of action than sourcing a replacement.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
What is full chisel chain?
A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.
What size file do you use on a 3/8 chainsaw chain?
With that said, the Stihl 3/8″ chain is identical in size to Oregon and other brands which all recommend a 7/32″ file.
What degree do you sharpen a 3/8 chainsaw chain?
What degree do you sharpen a 3/8 chainsaw chain? If you don’t know, or cannot figure out which chain you have, you can use the ‘default’ angles that most shops will use when sharpening chains that customers bring in: 30° / 60° / 0°, with a 0.025″ depth gauge offset.
Does Ace Hardware sharpen chainsaw chains?
Our experienced professionals will machine sharpen your chain saw for pitch-perfect cutting edges: tooth-after-tooth. Bring your chain saw into Steadman’s Ace Hardware and let one of the friendly, experienced mechanics give it a tune up.
How often should I change my chainsaw chain?
The chain sprocket must be replaced if the depth of the wear marks reaches about 0.5mm, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on.
How tight is too tight for chainsaw chain?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
Why is my chainsaw burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.