Chainsaws do not have a blade but a chain made up of lots of little teeth with sharpened blades on them, and few situations are as frustrating as dealing with a length of razor-sharp metal teeth that won’t behave as intended. There is a trick to untangling a new or old chainsaw chain that makes the process so simple that you’ll wonder why you didn’t think of it. Because chainsaw chains are stiff, the dangling, lowest part will poke straight out like a board until it reaches a vertical position.
No matter how snarled a chainsaw chain is, you can still untangle it using a simple repeated method. Proper care of a chainsaw and chain will give your chainsaw a longer and more productive life! The easiest way to care for your chainsaw chain is to make sure it’s clean, well-oiled, and the teeth are sharpened.
To survive the situation without postponing the work or destroying the chainsaw, you must learn how to untangle the chainsaw chain. Well, if the chain is still locked up in the chainsaw blade, then you need tools to remove the chain from the chainsaw. If it’s jammed in the chainsaw: Use the tools that suit your chainsaw and open your gasoline or electric chainsaw to get the chain off the chainsaw.
These could aid with taking the chain or chainsaw housing off. Continue to hold loops in your hands, and then raise the absolute lowest part of the chain. As a result, it will slide right past the loops, causing the chain to untangle.
Since this is a common issue when it comes to chainsaws, a responsible chainsaw owner has to know how to untangle a chain safely and with ease so that they can save time and get to using their chainsaw. The process of untangling a chainsaw chain is similar to the process of untangling a bicycle chain. If your chainsaw chain is still attached to the chainsaw blade, it will have to be removed to allow for the best untangling experience.
how to untangle my chainsaw chain Related Question:
How does oil get to the chain on a chainsaw?
As you throttle up, a worm drive engages the pump to send oil through a port that releases onto the bar. As the chain moves across the bar, it distributes the oil across the surface, reducing the friction and the heat that occurs when cutting.
Why do chainsaws get stuck?
Everyone Gets Pinched Well, blades can easily get stuck when you’re cutting downwards and the log or tree is not perfectly level with the ground. If a log is not sitting firmly on the ground when you cut, the downward force can cause the log to close up on your chain.
Why is my chainsaw chain not tightening?
If you’re having trouble tightening the chainsaw chain, it may be adjusted properly already. Check the tension on the chain by grasping it in the middle of the top of the guide bar and giving it a quick snap. The chain should quickly snap back into place with no sagging on the underside of the guide bar.
Why does my chainsaw keep jamming?
Here are our explanations! Indeed, whether it is a chainsaw electric ou thermal, it is the teeth of its links that come into direct contact with the wood and the materials to be cut. As a result, dirt, wear on the guide or links and even the motor can be the cause of jamming.
How long will a chainsaw stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Why does my chainsaw cut crooked?
Uneven top plates can cause a chain to cut crooked. It’s important to keep all top plates equal length. Dull cutters damaged by rocks can cause a chain to cut crooked. It’s important to remove all damage from cutters prior to cutting.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
Can you cut with the top of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.
Should a chainsaw chain move freely?
The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it.
What is a chainsaw sprocket?
What is the drive sprocket? The drive sprocket and the clutch drum are connected to the saw motor. The sprocket is designed to drive the proper-pitched chain around the guide bar.
What is a chainsaw brake?
One of the most important chainsaw safety features is the chain brake, which stops movement of the chain in the event of kickback during operation. The chain brake is activated when the front hand guard, located near the saw’s upper handle, moves rapidly toward the chainsaw operator.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How many times can a chainsaw chain be sharpened?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.