Over time your chainsaw chain will begin to dull, corrode, break, etc. Once your chain is on the guide bar you will need to thread the chain onto the saw’s clutch drum. Use the tensioning screw to add tension to the chainsaw chain.
Proper chainsaw chain tension is critical for the performance of your chainsaw. Learn how to check and tighten your saw chain to avoid the risk of kickback and chainsaw related injuries. Find a full selection of saw chain specifically made to fit your chainsaw.
Because it’s a normal part of chainsaw use and ownership, knowing how to correctly change a chainsaw chain can save tool users time and money. Of course, the first step toward a proper chainsaw chain replacement is getting a matching replacement chain for your chainsaw. To read about correct chainsaw chain tension, see our article: How to Tighten a Chainsaw Chain.
Even if you have been diligent in your chainsaw maintenance and care of your saw, there will come a time to ask yourself when to replace your chainsaw chain. Keeping your bar and chain well oiled when cutting will help ensure you have an uninhibited movement around the bar, which will allow it to cut more efficiently, and avoid problems with the chain teeth themselves. In short, if you have attempted to balance your cutting teeth, are certain of your depth gauge, and the tension is properly adjusted, but the saw still doesn’t cut correctly- then you need to replace the chain.
how to install new chainsaw chain Related Question:
Which way does chain go on chainsaw?
The correct direction for a blade to face is with the pointy edge of the blade teeth facing toward the way the blade rotates. Essentially, you want the pointy edges of the blades rotating on top of the chain bar, moving toward the tip of the bar, and away from the body of the machine.
Why is my chainsaw blade smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Do new chainsaw chains come sharpened?
Yes, the chains of the chainsaw come sharpened from the factory when you buy a new one. There is no need to sharpen it before your first job. But even the sharpest chain for the chainsaws available in the market will lose their sharpness over time and grow very dull.
Why is my chainsaw burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
How long should a chainsaw blade last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Do chainsaw chains stretch over time?
Over time, the chain on your chainsaw will become loose, and new chains will stretch a lot more when you are breaking them in. You need to pay attention so that you can tighten a loose chain before you turn the chainsaw on, as loose chains are dangerous.
Can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
How often should you change the bar on a chainsaw?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
Why does chainsaw cut in a curve?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
What type of chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
Why does my chainsaw blade go dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
Can you cut a stump with a chainsaw?
A chainsaw, however, can grind up a stump and leave it all but gone; still, you can’t use a chainsaw to completely grind away a stump. After much of the stump is gone, however, dirt and other material can cover the stump so it won’t be noticed.
Can you overheat a chainsaw?
Chainsaw engines run at high temperatures, usually in the summer, so they can quickly overheat. To prevent chainsaws from overheating they must be cleaned regularly. The cylinder and starter both contain air intake areas that pull cool outside air into the engine when it’s running.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.