How to Start a Chainsaw That’s Been Warmed Up.If you’re taking a short break from using the chainsaw, then you can restart it without using the choke since the engine is already primed with fuel. If you haven’t purchased a chainsaw yet, I encourage you to take a look at my best gas chainsaw reviews. Check out my best 18 inch chainsaw page and best 16 inch gas chainsaw page to see what you can get.

how to set up a new chainsaw Related Question:

What do you do with a new chainsaw?

If you just purchased a new Stihl chainsaw, it’s a good idea to break it in before using it for any cutting projects. Immediately using it to cut anything, particularly very heavy or dense wood, can ruin the chain.

Do you need to run in a new chainsaw?

Re: NEW CHAINSAW ” BREAK-IN” Stihl’s break in consists of the instruction NOT to run the saw at full throttle out of cut for the first three tank fillings. This allows time for the engine parts to “bed in”. They also say that max power develops between 5 and 15 tanks of gas.

Why can’t I start my new chainsaw?

A fuel issue is one of the most common reasons why a chainsaw won’t start. If the operator has repeatedly been trying to start the chainsaw through the recoil starter system, they may have accidentally flooded the engine with fuel. A common indication the engine has been flooded is the smell of gasoline in the air.

What does the choke do on a chainsaw?

The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.

Should you run a chainsaw at full throttle?

Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.

How long should you run a chainsaw?

Depending on the type and usage, you can expect a gas Chainsaw to run between 15 and 40 min before you have to fill it up again. Most battery-powered chainsaws have a run time of up to 2 hours, but there are high-capacity power packs that will last much longer.

Should you warm up a chainsaw?

The gas engine in a gas chainsaw should warm up, but due to the engine’s small size, this will happen quickly. Normally the engine will run for a short time after startup before you really start using it, giving the oil enough time to warm up and lubricate all engine parts.

Do I need to break in a chainsaw?

Typically we recommend a break in period of 6-10 tanks of fuel. During this period the engine should not be allowed to run at high RPMs for extended periods of time.

How do you break in a chainsaw after rebuild?

in chainsaws that recommend 8 oz to 1 ga. On a fresh rebuild, I use 40-1 and add about 1/2 teaspoon of extra oil to full tank. I use the saw, with extra oil, but avoid high rpm out of cut and extended idling, until two or three tanks have been used. After that, I use regular mix,40-1 and do final carb setting.

How do I start my Stihl chainsaw for the first time?

Press and hold the throttle trigger lockout (located on the side of the chainsaw, above the trigger) with your thumb, then move the master control (on the left of the rear of the chainsaw) down as far as it will go. This is the position you should start the chainsaw in the first time you use it each session.

How long to wait if chainsaw is flooded?

Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.

What does a spark arrestor do on a chainsaw?

The spark arrestor on your chainsaw prevents dangerous hot sparks from igniting fires while you’re working. If the arrestor is clogged or dirty, however, it will also prevent exhaust from leaving the motor, which can prevent it from running.

Why does my chainsaw not stay running?

Your chainsaw’s engine needs the right supply of air to run properly. A clogged air filter can be the reason why your chainsaw won’t start or stay running. Find your chainsaw’s air filter and remove it. If it’s clogged or too dirty, wash it or replace it.

Do you want the choke open or closed?

Should Choke Be Open Or Closed When Running? Having been in operation over the last few days, a gas engine that is still warm doesn’t require an choke. When it is warm, the fuel can evaporate quickly. It is recommended you close the choke the most if the engine is cold outside and it is warming outside.

Is throttle and choke the same?

is that choke is a control on a carburetor to adjust the air/fuel mixture when the engine is cold while throttle is a valve that regulates the supply of fuel-air mixture to an internal combustion engine and thus controls its speed; a similar valve that controls the air supply to an engine.

Leave a Reply

Your email address will not be published. Required fields are marked *