I remember someone on here mentioning using a type of Meguiar’s automotive gel polishing compound; I can’t remember the exact product name, but I remember they also posted some before and after pics of a saw and it looked impressive. This wasn’t all that long ago that I saw this; maybe four weeks at most, but I don’t remember the thread at all.
There are a ton of old Stihl 1127 and 1123 series saws out there, and they can be brought back to life usually with salvage parts and elbow grease. Nothing matched…Well, you can’t paint plastic to any good end, and saws need to be durable… So a buddy of mine mentioned Dying it… So that’s what we did…First we had to scrounge up a metal bucket or drum that could take heat and hold enough liquid to submerge saw parts into. Black…. All the parts had to be run through the parts washer, then cleaned with hot soapy water, to remove the impregnated oil and grease.
how to make old chainsaw look new Related Question:
How can I make my dull plastic shine again?
Using Vaseline And, all you will need is a dab of Vaseline. A petroleum jelly or any ointment which uses a petroleum base can be expertly used to shine dull plastic. You will simply need to rub the jelly onto the plastic, leave it untouched for a minute or so, and then wipe it off.
Can you restore sun faded plastic?
Vehicle plastics typically fade due to sun exposure, which traps dirt in the plastic, but you can restore the plastic with a rinse and a heat gun.
Does Vaseline restore plastic?
If you have some old, faded electronics or other plastic gadgets in your house, you can make them look great again with just a dab of Vaseline.
Can you use wd40 on chainsaw?
We recommend using WD-40® Specialist® Fast Acting Degreaser and soak it for 10 to 15 minutes. Next, use a wire brush to remove all the grime (repeat several times) and wipe with a paper towel to make sure all the dirt is gone.
How do you polish old plastic?
Polishing plastic with toothpaste Simply apply a pea-sized amount to a microfibre cloth or cotton cloth and rub it into the clean scratched area using circular movements. Do this for a couple of minutes or until the scratch is no longer visible. Rinse, dry and this should be enough.
Does wd40 restore plastic?
No problem. If you’ve got a can of WD-40 Multi-Use Product in the garage, your plastic-cleaning problems are solved. Simply spray onto the area you want to clean and scrub a little with a rag until the plastic surface looks clean. As an added bonus, you can also use WD-40 to polish plastic surfaces on your car.
Does Vaseline melt plastic?
Yes- vaseline is a petroleum jelly and it can degrade plastics – AND – it is about 8000 weight! It will glue the gears rather than lube them.
What’s the best thing to clean plastic with?
Use a nonabrasive, all-purpose cleaner. Rinse with clean water and dry with a clean, soft cloth. Avoid using abrasive cleanser that may scratch the plastic. Use a tub/tile/sink cleaner; nonabrasive, all-purpose cleaner; or a paste of baking soda and water.
What can I do with an old chainsaw?
Gas and oil can be disposed of at a household hazardous waste collection site for free. Remove non-metal parts and place in the trash. Metal parts can be recycled as scrap metal.
What is the best thing to clean a chainsaw with?
In a well-ventilated area, take a bucket and mix one cup of ammonia with one gallon of water. Place the chainsaw chain in this solution and let it soak for 15 minutes. Put on a pair of thick rubber gloves for protection. Then, use a soft-bristled toothbrush to scrub each section of the chain until it’s free of debris.
How often should you clean a chainsaw?
BEFORE AND AFTER EACH USE: Keep your chainsaw running smoothly by spending an extra minute or two before and after each use to inspect your chainsaw. Clean the chainsaw bar after each use by scraping out any debris inside the track.
Can I clean chainsaw with brake cleaner?
Can I Use Brake Cleaner To Clean My Chainsaw? If you are washing parts that are covered in oil, you should never use water on them. Instead, use carb or brake cleaner to blow out the dirt and oil more effectively.
Does heating plastic make it brittle?
Environmental factors such as temperature: Decrease in temperature leads to less mobility and hence more brittle behavior of plastics.
How do you darken faded black plastic?
If your plastic object is dirty, wash it with soap and warm water. Dry it off with a towel before restoring it to prevent the olive oil from slipping off. Pour a coin-sized amount of olive oil on a cloth. Olive oil can restore black plastic’s natural color, clearing up any faded or discolored areas.