Getting your chainsaw stuck in a tree can and will happen to most people who use a chainsaw from time to time. When the tree is on the ground, you will have better luck with different tools, and you don’t necessarily have the downward pressure of the entire tree on your chainsaw. Strategic use of wedges can ensure that the tree doesn’t fall back on your chainsaw so you can cut all the way through, and this also ensures the tree falls in the direction you want it to.
Misjudging where the tension is can cause the chainsaw to become trapped. It is never a good idea to shake your chainsaw while the engine is still running. To do so could cause irreparable damage to your chainsaw and potentially fatal injury to yourself or others.
Retired Conventional hand-felling logging operation with cable skidder and forwarder, Frick 01 handset sawmill. If possible, get into a couple of the courses of the Game of Logging and,. I’ve used a car jack to lift the log and get the saw out works on big logs too.
how to get chainsaw out of tree Related Question:
How do you cut a tree under tension?
A felled tree will usually have saw-pinching areas where the top of the log is under compression and the bottom is under tension. If you have access to the top and bottom of the log, you can handle this one of two ways. Make a cut directly down from the top and then finish by cutting up from the bottom.
Why do chainsaws get stuck?
Well, blades can easily get stuck when you’re cutting downwards and the log or tree is not perfectly level with the ground. If a log is not sitting firmly on the ground when you cut, the downward force can cause the log to close up on your chain.
Do I cut compression or tension first?
Always cut on the compression side first! The area on the outside of the bend will pull apart when cut. This is the tension side. If you decide to cut this side only, the tree will split apart before the cut can be completed.
What is chainsaw kickback?
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback occurs when the end portion of the nose of the bar (the kickback zone) strikes an object and the chain momentarily snags, or is pinched.
What is bucking a tree?
Bucking a tree The process of cutting a tree into usable lengths is called bucking. Bucking often occurs as a tree is being limbed, such as when the limbs of the crown are to be used as firewood. When cutting firewood, make sure you know the needed length of wood before you leave home.
Should a chainsaw chain move freely?
The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it.
Can you cut with the top of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.
How do you cut big limbs off a tree?
Proper pruning of large tree limbs involves three cuts: Cut #1, Notch Cut: Cut a small notch in the bottom of the limb, 2-3 feet away from the trunk, and about a quarter of the way through. This notch will keep the bark from splitting when you make the next cut.
How do you cut a chainsaw?
Teeth are arranged in alternating right/left fashion to help a chain cut evenly and straight. Depending on the length of the chain for a certain size bar, there will either be an equal number of alternating left hand and right hand cutters, or the chain will end with 2 back to back same-side cutters.
How do most chainsaw accidents happen?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
How old are trees when they stop growing vigorously?
But by the time the tree reaches 90 years of age, its growth has slowed to about half a meter – roughly a foot and a half – a year. By the time the tree is 150 years old, height growth has virtually stopped, even though the tree may live another 100 years.
How do you get rid of fallen tree root balls?
Try to cut far from the root ball. Next, use the grub hoe to lift out the cut roots. Pull additional ones out by hand if you can. Push the stump back and forth to loosen the roots and continue to cut and pull roots until you are able to remove the root ball from the soil.
Why is my chainsaw blade smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Can you chainsaw upwards?
Never cut above shoulder height. Work on the uphill side of trees so they’ll roll away from you instead of over you.