The pitch measurement of a saw chain tells a pro user about to the overall size of the saw chain. Saw Setup: The pitch of the chain, the pitch of the drive sprocket, and the pitch of the bar tip must all match. The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links.
How to determine the pitch and gauge of your saw chain. When ordering saw chain the following information will assist us in matching the correct chain to your saw. Additionally if your saw is a lesser known brand or a consumer type saw purchased from a hardware/big box type store then knowing the bar mount “Style/number” on your saw is helpful.
Matching the right chain to a chainsaw is easy if you have the right measurements matching the right chain to a chainsaw is a little more complicated than finding other power tool accessories, because of the unique way that chainsaw chains are measured. After matching the right size of chain there is still a host of chainsaw chain types and features to choose from and match to the application, but that’s usually much more straight-forward than finding measurements. Page is also a great way to get more familiar with chain sizes and types, even if there’s still some time before your next chainsaw chain replacement.
“Using the wrong size bar or chain can damage the chainsaw and injure the chainsaw operator,” says Vince Christofora of Woodstock Hardware. Read on to learn how to measure your chainsaw’s bar and chain. Sometimes called a chainsaw blade, the chainsaw bar is the metal “Arm” that holds and supports the chain during cutting.
how to measure chainsaw pitch Related Question:
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What is the pitch on chainsaw chain?
Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest.
How do you measure the pitch of a chainsaw sprocket?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.
What is a 3/8 pitch chain?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
What is the correct file size for 325 Stihl chain?
325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
What pitch is best for chainsaw?
Experts say the best chainsaw chain for cutting firewood is the Husqvarna High Performance 18 inches, 0.05 gauge, 0.325 pitch chain.
How do you pick a sprocket size?
This is determined by the the number of teeth on the front sprocket, compared to the number of teeth in the rear sprocket. For example, a motorcycle with a 17-tooth front sprocket and a 45-tooth rear sprocket would have a ratio of 2.65 (45 divided by 17 = 2.65).
What is the pitch diameter of a sprocket?
The sprocket pitch diameter is an imaginary circle through which the chain pin centers move around the sprocket. The pitch diameter is the fundamental design geometry that determines the size shape and form of the sprocket teeth dimensions.
Are chainsaw sprockets gauge specific?
Drive sprockets can drive any gauge chain, only the pitch matters.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
What size file do I need for a .325 chainsaw chain?
4.8mm round for sharpening . 325 pitch chain, 8 inches long. The superior file for sharpening saw chains is the Swiss-made double-cut file from Oregon.
What pitch is a .325 chainsaw chain?
050″ Gauge Saw Chain, 18″
Does gauge matter on chainsaw chain?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.