how to use chainsaw raker gauge Related Question:
How high should the rakers be on a chainsaw?
The raker should be about 0.50. 8 mm lower than the cutter. You sharpen the cutters first. Lay the file gauge on the chain.
What does a raker do on a chainsaw?
Depth gauges, “riders,” or “rakers,” as they are sometimes called, control the amount of wood severed by a cutter tooth. During the life of a pro saw chain, they occasionally need maintenance for top cutting performance.
What happens if you file rakers too low?
If the rakers aren’t at the right depth, your saw won’t self-feed and you’ll find yourself pushing down on the saw as you cut. That not only wears you out, but it wears out the bar and chain as well.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
What are rakers?
raker. / (ˈreɪkə) / noun. a person who rakes. a raking implement.
Why does my chainsaw pull to the left?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Why does my chainsaw cut at an angle?
Uneven top plates can cause a chain to cut crooked. It’s important to keep all top plates equal length. Dull cutters damaged by rocks can cause a chain to cut crooked. It’s important to remove all damage from cutters prior to cutting.
What is the gauge on a chainsaw chain?
The gauge of a chain refers to the thickness of its drive links. It is determined by measuring the portion of the drive link that fits into the groove of the guide bar. It is usually expressed in thousandths of an inch: . 050″ or .
How long should a chainsaw blade stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Which direction do you file a chainsaw?
File the teeth from the inside towards the outside. The easy way to remember the correct direction is that the tip of the file should always point away from the engine. Hold the file at a 90-degree angle to the flat sides of the guide bar. Move the file at a 30-degree angle to the straight line of the chain.
Does skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.