Normal wear can make it difficult to accurately measure chain gauge on a worn chain. “Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest. Saw chain sequences include: standard, semi-skip, and skip.
how to get right chainsaw chain Related Question:
How do I know which chain to buy for my chainsaw?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
Does any chain fit any chainsaw?
No, chainsaw blades are not universal, not every bar and chain will fit on your machine. Chainsaw chains need to have the correct specification to fit on your bar. If you have a chain that is too long or too narrow it will not fit. Mixing brands of chains is no problem as long as they are compatible.
Will Oregon chains fit Stihl?
Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. This product is only available through retailers or servicing dealers. Designed to fit most chainsaw models that require a 3/8 Inch low-profile pitch, .
Can I use a different brand chain on my Stihl chainsaw?
Stihl manufacturers replacement parts, including chains, as well as chain saws. Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw.
Can I use an echo chain on a Stihl chainsaw?
STIHL 63PM3-56 16-inch Chain Saw Chain – Fits Homelite, Poulan, Echo, Remington and Craftsman.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What is a 420 chain?
– All PEER roller chains incorporate solid rollers enhancing rotation on the. bushing while reducing impact loads on the sprocket tooth during operation. – All chain components are heat treated to achieve maximum strength. and greater wear resistance.
What do chainsaw chain numbers mean?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The first number represents the pitch: 1 = 1/4″ 2 = 0.325″
Are all 14 inch chainsaw chains the same?
The size of a chain saw’s chain does not always correspond to the size of the guide bar. Determining the correct size of chain for a chain saw with a 14-inch guide bar involves several factors, including the size of the drive lugs and their distance from each other along the chain.
What does pitch and gauge mean on a chainsaw chain?
Pitch and gauge of the chain. * Pitch is the distance measured on center of any three rivets in a row. This distance will most commonly be 1/4″ . 325″ or 3/8″. * Gauge is the width of the groove in the bar that the chain rides in.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Will a Husqvarna chain fit a Stihl?
As a general answer, Husqvarna chains can go on a Stihl chainsaw. Though they can fit onto the Stihl chainsaw perfectly, these two chainsaw brands use different standard pitch sizes.
Does the number of links in a chainsaw chain matter?
Number of links is to fit the bar – pitch is to fit the sprocket. Show activity on this post. Since the number of links is larger(81 instead of 74), there is low chance that it would fit properly.